Catalogue RJ Field BR - page 36

Amphenol
36
RJF TV
Transversally sealed receptacles
Part number code
Series
RJFTV
:
MIL-DTL-38999 Series III
RJF TV
7S
A
2
G
03 100BTX
Shell type
2S
:
sealed square flange receptacle
7S
:
sealed jam nut receptacle
Coding
A,B,C,D
Back terminations
(for receptacles only)
1
:
female RJ45
1RA
:
right angle female RJ45
2
:
RJ45 Cordset
Shell material & finish
N
:
aluminium shell - nickel plating -
ROHS compliant
G
:
aluminium shell - olive drab cadmium plating
BZ
:
marine bronze shell -
ROHS compliant
Nota
: receptacle inserts are metallized
BZC
:
aluminium shell - black zinc cobalt plating -
ROHS compliant
ZC
:
aluminium shell - green zinc cobalt plating -
ROHS compliant
ZN
:
aluminium shell - black zinc nickel plating -
ROHS compliant
Cordset length
(For Receptacles with “2” Back Termination only) - Other lengths are available on demand
03 100 BTX
:
0.3m [11.81 inches]
05 100 BTX
:
0.5m [19.68 inches]
10 100 BTX
:
1m [39.37 inches]
15 100 BTX
:
1.5m [59.05 inches]
xx OPEN
: open cable - with no plug at the end (
xx
to be replaced by the cordset length 03, 05, 10, or 15 - see above)
Remark: cabling configuration:
100 BTX = 568B (Ethernet specification)
Examples:
- series III, sealed jam nut receptacle, A coding, with female RJ45 back termination, olive drab cadmium plating:
RJF TV 7SA 1 G
- series III, sealed jam nut receptacle, A coding, 1.5m [59.05”] 100 BTX cordset, olive drab cadmium plating:
RJF TV 7SA 2 G15 100BTX
In some applications, a transversal sealing for the receptacle is a « must
». This will prevent fluids and dust from going through the receptacle
when plug or cap are not mated to the receptacle.
The sealed solution (version "S") has a compound at the rear of the
receptacle as shown on the picture.
The Sealed RJF TV has been successfully tested in very high vibration
corresponding to airplane applications.
compliant
ROHS
N, B
&
BZ
Main characteristics
n
Same as the RJF TV series.
n
A complete IP68 sealing of the receptacle (even with no plug or no
protective cap mated) is added.
n
Outside dimensions are the same as the standard RJF TV series.
n
Vibrations: the compounded versions of the RJF TV have been tested in
vibration following the NAS 1599 Aeronautic specification (Ambient tem-
perature):
5 - 3000 Hz, 20g, 2,5 mm [.1 inch] double amplitude, 3 axes, 12 hours
Note: this specification exceeds MIL-C-26500 requirements.
RJFTV 2S
A
2 G 15 100BTX
Example :
IMPORTANT NOTE
Due to the compound, the coding of the connector must be done in the factory : use the
codes A, B, C or D in the part number:
see below
.
Receptacle
Main key
Coding A Coding B Coding C Coding D
Data transmission
10 BaseT, 100 BaseTX and 1000 BaseT networks
Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC
11801
Applications
n
Outdoor equipment
n
Airplanes equipment
n
Tactical radios
n
Shelters
n
Rugged computers
n
Data acquisition and transmission in harsh
environments
1...,26,27,28,29,30,31,32,33,34,35 37,38,39,40,41,42,43,44,45,46,...156
Powered by FlippingBook