Catalogue RJ Field BR - page 84

Amphenol
84
IEEE Ethernet standards
Models
Features
802.3/u 802.3x
802.3z
802.1p 802.1D 802.1w 802.1Q
RJS XX MG 7F3G XX Managed - Gigabit
IEEE 802.3/u
10 Mbps & 100 Mbps fast Ethernet
IEEE 802.1p Priority queuing - QoS, CoS, ToS/DS
IEEE 802.3x
Full-Duplex with flow control
IEEE 802.1D/w Rapid spanning tree for redundant rings
IEEE 802.3ab 1000 Mbps Gigabit Ethernet
IEEE 802.1Q VLAN for traffic segregation
Ethernet features
RJ45 ports
10 shields RJ45 ports 10/100 BaseT(X) or 1000 Base T(X)
Connectors for RJ45 ports
RJFTV: jam nut receptacle based on MIL-DTL-38999 III
Olive drab cadmium or Nickel plated
RJ45 speed
10 or 100 Mbps auto -negotiation
Typical latency
16 us + frame time @ 10 Mbps (varies on load and settings)
5 us + frame time @ 100 Mbps
Full / Half Duplex
Automatic or configurable
RJ45 MDI/MDIX
Auto-crossover
RJ45 TD and RD polarity
Auto-polarity
MAC addresses supported
8192
Memory bandwidth
32 Gbps (gigabit) ; 3.2 Gbps for all other models
Ring features
Link loss recovery time: 30 ms plus 5 ms per hop
(for Ring model only
)
Maximum switches in ring: 50+
Dual Ring support
Environmental specifications
EMI emissions
EN55022 class A, FCC part 15, IC ES-003
EMC immunity
IEC61326-1, IEEE C37.90
Shocks
MIL-STD-810F: 40g, 11ms, 18 saw tooth shocks
Vibrations
RTCA/DO-160C sinusoidal vibrations 5-55 Hz: 0.01 inch ; 55-500 Hz: 1.5 g
Altitude
MIL-STD-810F: 50.000 ft - 15.000 m
Temperature
Operating -40°C to +70°C
Storage -40°C to +85°C
Weight
approx 2.8 kg
Power supply
Input voltage
MG7F3G: 10-30 VDC, redundant power input (P1 and P2)
MG7F3G-704: 10-30 VDC, single power input (P1 only)
MG7F3G-PSM: single power input AC or DC - AC voltage: 85-264 VAC/Frequency 47-63 Hz
- DC voltage: 120-370 VDC
Input power
5 W typical (all ports active)
Connectors for power
MIL-DTL-38999 III jam nut receptacle, olive drab cadmium or nickel plated
1 connector TVx07xx0935P: 6 cts # 22D (wire 0.4 mm
2
maxi)
“OK” contact output
Sourcing power ; Maximum current : 0.5 A
MG7F3G: ON if P1 and P2 have power and switch software is running
MG7F3G-704: ON when software is running
MG7F3G-PSM: ON when software is running; output power: 24VDC
Additional power protection for models MG7F3G-704 (option-704)
MIL-STD-461E
CE102 Conducted emission
DEF-STAN-59-41
DCE01/DCE02
DEF-STAN-61-5
Pt 6
MIL-STD-704A
600V input transient, applied for 10us
MIL-STD-1275A
Spikes: +/- 250 V for 100us
Surges: 100 V for 50 ms at 0.5 mohm
Ripple: 14VAC pk-pk
1...,74,75,76,77,78,79,80,81,82,83 85,86,87,88,89,90,91,92,93,94,...156
Powered by FlippingBook