DOC-000502-ANG EXPANDED BEAM january2015 BR - page 10

Amphenol
10
BACKSHELL MAIN USE :
To be used inside a vehicle or on a box to connect CTOS
receptacle to the electro-optic transceivers, in a protected
area. This rear part makes possible an easy cross connect
output. Straight rear part to be used with 1, 2, 4, pigtails (2.8
mm single cable or duplex cable 2 x 3 ,2x 1.6 ). Each pigtail
can be terminated with ST, SC, FC, duplex SC and MTRJ
connectors. Pigtails tensile strength : 10 daN (depending on
cable performance).
The square flange receptacle has to be mounted on to the vehicle panel. It provides the link between the inside electro-
optic device and the outside optical link. The square flange receptacle receives the first CTOS plug of the outer link
patchcord. The square flange type makes it possible to have a high density of receptacles on a panel. Easy panel cut off of
5 round holes. Fixation by 4 screws. - Front sealing ensured by a flat gasket. Electrical contact between panel receptacle and
protective cap (EMI,CEM protection when cap is on). Protective cap attached to the panel or to the receptacle by a stainless
steel rope.
L7
L7
L2
L3
L1
D2
L4
L7
L7
SOCAPEX
D2
L2
L3
L1
L4
D1
L2 L3
L1
L5
D2
BACKSHELL MAIN USE :
To be used inside a vehicle or on a box to connect CTOS
receptacle to the electro-optic transceivers, in non protected
area. Unsealed straight backshell to be used with 1 or 2
tactical cables (1,2 or 4 number of channels) inside a vehicle.
The rear part is made of 2 half shells molded in aluminum
alloy. Possibility to add a multi channel connector at the other
cable end. Cable/receptacle tensile strength : 100 daN
(depending on cable perfor-mances).
BACKSHELL MAIN USE :
To be used inside and outside of a vehicle to connect CTOS
receptacle to the electro-optic transceivers, in a non protected
or humid area. Straight backshell to be used with a 1,2, 4
fibers tactical cable inside or outside a vehicle. The rear part is
made of an aluminum alloy shell with bit of cable retention
gland. Complete front and rear sealing. Possibility to add a
multi channel connector at the other cable end. Cable/
receptacle tensile strength : 100 daN (depending on cable
performance).
L7
L7
L2
L3
L1
D2
L4
L7
L7
SOCAPEX
D2
L2
L3
L1
L4
L4
L5
D1
L2 L3
L1
L5
D2
SOCAPEX
PLANCHE CTOS CTOL 3_3
L2 L3
L1
L5
L6
L7
L7
L2
L3
L1
L7
L7
D2
Series L1 L2 L3 L4 L7
f
d2
CTOS MM
*
23 13.6 82 29 49.9 28
CTOS SM
**
23 13.6 90.5 38.7 49.9 28
CTO MM
*
27 13.6 96 44 60 51
CTOL SM
**
27 13.6 96 44 60 51
Series
L1
L2 L3 L7
f
D2
CTOS MM
*
23 13.6 83 49.9 39
CTOS SM
**
23 13.6 97 49.9 39
CTOL MM
*
27 13.6 102 60 39
CTOL SM
**
27 13.6 102 60 39
Series L1
L2 L3 L4 L7
f
D2
CTOS MM
*
23 13.6 132 max 64.7 49.9 33
CTOS SM
**
23 13.6 146 max 78.7 49.9 33
CTOL MM
*
27 13.6 152 max 84 60 33
CTOL SM
**
27 13.6 152 max 84 60 33
CTOS 00/CTOL 00 “Square Flange” Receptacle rear mount
CTOS 00P/CTOL 00P
Straight Backshell Receptacle for Pigtails
CTOS 00C00/CTOL 00C00
Straight Backshell Receptacle for Tactical Cable
CTOS 00M00/CTOL 00M00
Sealed Straight Backshell Receptacle for Tactical Cable
*
MM
: Multimode
**
SM
: Singlemode
1,2,3,4,5,6,7,8,9 11,12,13,14,15,16,17,18,19,20,...36
Powered by FlippingBook