 | | | | | |
 Mil / Aero Markets | |||||
| |||||
 Military and commercial avionic / Airframe | |||||
 | | ||||
| C4I SR | |||||
| | ||||
| Ground Vehicles | |||||
| | ||||
| Marine applications | |||||
| | ||||
| Weapons / Munitions | |||||
| | ||||
| Space | |||||
| | ||||
For other Mil/Aero products not described in this list, please consult documentation link hereafter : Amphenol documentation
Click on your market segment
 | Cable supports Reduced weight, high temperature thermoplastic cable support systems retain wire bundles in aircraft, reduce installed cost, and provide increased reliability. Custom designs, configurations and materials are available. These cable supports are aeronautic and ground vehicles fluids compatible and flame resistant. Highly reliable overmolded tie-straps for demanding applications. | |
| > Wiring accessories [1675,29 Ko] | ||
 | ||
 | Pipe supports Custom accessories for airframe, ground vehicles and boats cabling and pipe support form a total pipe and cable management system developped to reduce weight, cost and installation time. Simplified installation and maintenance enhance reliability. Engineered high-temp plastics, no metal parts, engineered to user's needs. | |
| > Pipe supports [498,92 Ko] | ||
| ||
 | Custom design Custom accessories cabling and pipe support form a specific pipe and cable management system developped to reduce cost and installation time. Simplified installation and maintenance enhance reliability. Plastic materials engineered to user's need : high-temp, fluids compatible, high reliability, ... Applicable to Aeronautic, Ground and Sea equipments : vehicle frames, fuel tank, Wheel well... | |
| > Please consult us | ||
| ||
 | RNJ RNJ rack and panel connectors with realignment capability designed for harsh environment in term of sealing, shocks, vibrations and EMI-RFI protection. RNJ connectors are designed to connect electrical devices between a moving unit (rack) and a fixed unit (panel). The locking of the mating pair(s) is ensured by the mechanical device of the rack. RNJ connectors are available in jam nut shell configurations. The RNJ receptacle is mateable with a Mil-DTL-38999 Series I plug as well for easy testing of the rack system. All Mil-DTL-38999 Series I -from shell size 11 to 25 - and additional LPHD -size 23 contacts- insert patterns are available in RNJ version, including Signal, Power, Coax, Twinax, Triax, Differential Twinax, Quadrax. For optical termini, please consult the RNJOP with high performance dedicated inserts for 2,5mm ferules. Hermetic versions available too. | |
| > RNJ - Harsh environment rack & panel connectors [1395,67 Ko] | ||
| ||
 | ARINC 600 ARINC 600 connectors are recognized standard rack and panel connectors for new avionic designs. Compared to the ARINC404, the ARINC600 features lower mating force contacts, increased contact count and a front release, floating keying system. Amphenol ARINC 600 connectors offers signal, power, coaxial, PC Tails, wire wrap, twinax, differential twinax and Quadrax contacts as well as different optical termini. Filtered versions are offered. | |
| > ARINC 600 - Rack and panel connectors [1640 Ko] | ||
| ||
 | SIM Rack and Panel connectors Miniature, rectangular interconnect system serves as an alternate to cylindrical connectors where space and modularity are critical. The rack and panel versions are offered with guiding pins and spring devices to ensure a perfect contact mating at the interface. The versatility of the SIM connectors allows many different shapes for the rack depending on the customer's requirement. The contact offering includes Power, Coax, Twinax, Triax, Differential Twinax, Quadrax as well as Optical termini. | |
| > SIM EN4165 AALB [3483,16 Ko] | ||
| ||
 | R39 The R39 rectangular connector provides high performance in the severe environment demands of military specifications. Its lower profile translates into a smaller space-saving footprint and the new rectangular orientation provides additional installation options. It delivers the same reliable, familiar benefits found in Mil-DTL-38999 Series : Effortless installation, blind push pull mating, scoop-proofrecessed pin design... The inserts offer combinations of Signal, Power, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > R39 Series ACC [716,41 Ko] | ||
| ||
 | Power solutions (RNJ/RFM) Depending on the customer's requirement, Amphenol offer different solutions in terms of power supply in blind mate configarations. The wide range of power contacts (60 Amp, 100Amp, 250Amp, 500Amp) is available in non-environmental or environmentally sealed version, rectangular or cylindrical shells styles, rack and panel or lockable versions, with or without EMI-RFI protection... Different contact technologies are available depending on the product series including the high performance Radsok®. | |
| > POWER RFM : power floating racks [474,09 Ko] | ||
| > RNJ - Harsh environment rack & panel connectors [1395,67 Ko] | ||
| ||
 | Custom design Due to the large Rack & Panel products range and the strong experience in this type of products, Amphenol Socapex provides its customers with complete Rack & Panel solutions. These solutions may include RF, LVDS, Power and MM & SM Fiber Optic transmissions. | |
| > Please consult us | ||
| ||
 | RJField Range Rugged circular and rectangular interconnect which can be fitted directly -without particular tooling- with standard cordsets such as RJ45 Ethernet (Cat.5e), USB, Firewire (IEEE1394), RJ11 and the MTRJ and LC fiber optic interfaces. Available in Mil-DTL-38999 Series III or Mil-C-26482, low cost Cat.6 circular shells, or rectangular shells such as SIM. Provides environmental protection : IP67, dust, shocks and vibrations. Eliminates hazardous and costly in-field assembly. | |
| > Field Series Catalogue [11202,88 Ko] | ||
| ||
 | Differential Twinax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these differential twinax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Differential twinax are existing in different matched impedance versions and are terminated to a shielded twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Size 8 High Speed Quadrax and Differential Twinax Contacts [1012,66 Ko] | ||
| ||
 | Quadrax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these quadrax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Quadrax are existing in different matched impedance versions and are terminated to a shielded double twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Quadrax contacts [779,81 Ko] | ||
| ||
 | Harnesses Amphenol have a leading position in the Ethernet solutions for harsh environment and are involved in many Mil Aero programs requiring the highest performance level in term of Ethernet harnessing. The large range of Ethernet dedicated products such as RJField connector range including RJ45, RJ11, USB, USB2, USBB, Fire Wire, and Differential twinax, Quadrax contacts ... terminated to high performance cables offers to Amphenol's customers the right technical and cost-effective solution. | |
| > Please consult us | ||
| ||
 | RJ Switch A switch is a key-point element in an Ethernet Architecture. Ethernet Switches were designed initially for the “comfort” of office environment use, but are used now in Harsh Environment applications i.e battlefield communication systems. Amphenol Ethernet Switches are designed to provide a suitable interconnect solution in extreme conditions such as vibrations, temperature, oil, water, EMI - RFI standard compliant… by using high performance electronic components, rugged Ethernet and Power supply connectors such as RJField TV, and a heavy duty packaging. Amphenol Ethernet switches broad offering includes deterministic ethernet network, power supply redundancy, ring topology and quick recovery time, "store and forward" switching process, manageable and unmanageables versions... | |
| > Rugged and IP67 sealed Military Ethernet Switch - 8 ports [241,78 Ko] | ||
| ||
 | Custom Design Amphenol Socapex has the capability to provide its customers with complete Ethernet solutions including Switches, Electrical and Fiber Optic Tactical harnesses, Drums, Backpacks, Tactical Trolley for long distance fiber optic deployment ... These projects are supported by our Electrical, Electronic and Mechanical engineers located in the the same facility and working together in project teams with the latest project management methods which fulfill the EN9100 quality requirements. Moreover, Amphenol Socapex has a strong relationship with its suppliers which allows to offer the optimal technical solution in taking into account the cost-effectiveness . | |
| > Please consult us | ||
| ||
 | USBField USB Field allows the use of a standard USB2.0 connection in harsh environments : Sealed against fluids and dusts (IP67), Shocks, Vibration and Traction resistant, No cabling operation in field and no tools required, Mechanical Coding / Polarization (2 positions), Improved EMI protection. | |
| > USBF TV : reinforced USB connector - metallic MIL-DTL-38999 version - thread coupling with anti decoupling device [356,13 Ko] | ||
| ||
 | Fire Wire IEEE1394 FW Field allows the use of a standard IEEE1394 connection in harsh environments : Sealed against fluids and dusts (IP67), Shocks vibrations and traction resistant, No timely in-field cabling operation necessary, No assembly tools required, Improved EMI protection. | |
| > FW FIELD TV : reinforced IEEE1394 connector - metallic MIL-DTL-38999 version - thread coupling with anti decoupling device [294,45 Ko] | ||
| ||
 | RJFTV The RJField concept is to transform within 30 seconds and without specific tooling, a standard infocom cordset into a metallic rugged waterproof connector equiped with a Mil-DTL-38999 Series III shell suitable for harsh environment.. Rjfield TV allows the use of Ethernet Class D / Cat. 5e connections for 10 Base T, 100 Base TX or 1000 Base T networks in extreme environments. Many different configurations and options dedicated to customer needs are available such as PCB terminations, Thru-Bulkhead receptacles, Bronze marine shells, Self-closing caps... | |
| > RJF TV : reinforced RJ45 connector - metallic MIL-DTL-38999 version - thread coupling with anti decoupling device [277,51 Ko] | ||
| ||
 | Filters Cylindrical (Mil-DTL-38999,...) Amphenol have a very strong experience in designing and manufacturing Filter Solutions for the Mil Aerospace industry. Filtered connectors in cylindrical styles using planar and tubular technology provide EMI and EMP protection. The filter types are available in a wide range of capacitance and voltage values and may be selected in virtually any combination within the connector insert (Pi, LRC, CLR, C, T). Filter adapters available for existing devices for filtering without redesign. For PCB versions, we also provide header assemblies to protect the connector before soldering onto PC Board. | |
| > EMI Filter / Transient protection connectors [1988,96 Ko] | ||
| ||
 | Filters Rectangular (Mil-C-24308, MicroD...) Amphenol offer a large range of rectangular filter connectors such as Arinc 404, Arinc 600, Mil-C-24308 D-Sub and specific geometries to meet his customers applications. These products are available in different filtering technologies : Planar arrays and Tubular capacitors. The filter types are available in a wide range of capacitance and voltage values and may be selected in virtually any combination within the connector insert (Pi, LRC, CLR, C, T). | |
| > Filtered connectors : filtrated Arinc, MIL-C-24308 - Discrete filters, filters plates & terminal blocks [2045,31 Ko] | ||
| ||
 | Discrete Filters Amphenol FX Series of discrete Feed-Thru Filters offer excellent cost-effective solutionsfor military and aerospace electronics applications, especially where small size and high performance are important. Manufactured to meet the requirements of Mil-F-15733, they are available in threaded bushing and soldermount styles with capacitance ranges from 10pF to 600nF. Higher capacitance values and greater voltage withstand capabilities are available when necessary. | |
| > Filtered connectors : filtrated Arinc, MIL-C-24308 - Discrete filters, filters plates & terminal blocks [2045,31 Ko] | ||
| ||
 | Electrical cables Amphenol Spectra-Strip’s mission is to enhance the signal fidelity and extend the life of copper cable for these critical high bandwidth data transfer applications, and to provide exceptional customer value in the form of enhanced performance and lower total applied costs for the Information Processing. Today, much exciting new technology is currently being developed to extend copper's usable length for high data rate applications. This new technology revolves around driver signal pre-emphasis, equalization, and cable / connector / termination technology that minimizes skew, crosstalk, and EMI. These copper interconnects demand cables with exacting control of transmission line properties, far beyond typical Cat 6 structured wiring requirements, due to the gigabit signals being driven. To meet these challenges, Spectra-Strip has developed several new advanced cable technologies for cost effective mass termination and high bit rate, precision twinax applications. | |
| > Please consult us | ||
| ||
 | Tactical Fiber Optic cables Amphenol Spectra Strip has been engineering high performance cable products for more than 30 years. The division has developped and deployed worldwide, a comprehensive range of fiber optic cables specifically to meet the various harsh environments encountered in external applications such as Field deployable communication and data links. The 161 Series cable, with tight buffered helically stranded optical fibers combined with aramid strength members and a selection of jacket materials based on the application result in extremely strong, light-weight cable that is exceptionally flexible, rugged and survivable in military tactical field use applications. | |
| > 161 series LTD [383,99 Ko] | ||
| ||
 | Flex & Rigid Assemblies ACT Save weight and geometrically fit wiring into tight space requirements with Flex or Rigid Flex Circuits. Sculptured® Flexible Circuits with built-in termination eliminate the failures associated with crimped or soldered-on contacts. Flat, sculptured, or rigid-flex styles are strong, yet higly flexible for use with I/O connectors. | |
| > More info | ||
| ||
 | BNC BNC is a miniature version of the Type C connector and stands for Bayonet Neill Concelman and is named after Amphenol engineer Carl Concelman. The BNC product line is a miniature quick connect/disconnect RF connector. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. BNC’s are ideally suited for cable termination for miniature to subminiature coaxial cable (RG-58, 59, to RG-179, RG-316, etc.). Amphenol 50 O BNC connectors are miniature, lightweight units designed to operate up to 11 GHz and typically yield low reflection through 4 GHz. Amphenol also offers a full line of 75 O BNC connectors to meet the needs for higher performance impedance-matched cable interconnections. Part numbers that are listed with the appropriate M39012 number are military grade connectors produced in accordance with and actively qualified to the military specification MIL-C-39012. | |
| > BNC Amphenol RF [1865,88 Ko] | ||
| ||
 | TNC The TNC stands for Threaded Neill Concelman and is named after Amphenol engineer Carl Concelman. Designed as a threaded version of the BNC, the TNC series features screw threads for mating. TNC are miniature, threaded weatherproof units with a constant 50 O impedance and they operate from 0 - 11 GHz. | |
| > TNC Amphenol RF [2137,62 Ko] | ||
| ||
 | SMA SMA is an acronym for SubMiniature version A and was developed in the 1960's. It uses a threaded interface. 50 O SMA connectors are semi-precision, subminiature units that provide excellent electrical performance from DC to 18 GHz. These high-performance connectors are compact in size and mechanically have outstanding durability. SMA connectors for semi-rigid coaxial cables and the SMA Plug-to-Jack adapter offer a precise and simple means of phase adjustment for microwave devices. Built in accordance with MIL-C-39012 and CECC 22110/111, SMA connectors can be mated with all connectors that meet these spec mating diameters regardless of manufacturer. | |
| > SMA Amphenol RF [669,29 Ko] | ||
| ||
 | Differential Twinax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these differential twinax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Differential twinax are existing in different matched impedance versions and are terminated to a shielded twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Size 8 High Speed Quadrax and Differential Twinax Contacts [1012,66 Ko] | ||
| ||
 | Quadrax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these quadrax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Quadrax are existing in different matched impedance versions and are terminated to a shielded double twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Quadrax contacts [779,81 Ko] | ||
| ||
 | Blind Mate RF Amphenol SV Microwave, Inc. provides the ideal connector solution for rack-and-panel, module-to-module and module-to-motherboard applications. SMP, BMA, BMMA, BMZ and BZ blindmate connectors can be mounted in standard or custom shells. Fixed mount BMA connectors accommodate up to .030 inch (.76mm) axial and .008 inch (.20mm) total connector radial misalignment safely through 12GHz. The external spring mechanisms of float mount versions provide even higher axial and radial misalignment tolerances. Low-profile connectors offer the ultimate solution when space is at a premium. Custom cable assemblies are also available. | |
| > Blindmate SVM [1175,57 Ko] | ||
| ||
 | Signal Processing components Amphenol SV Microwave offer a large range of Signal processing components such as Phase shifters, Variable attenuators, Vector modulators, Mixers, Directional couplers, Power splitters, I/Q Modulators & Demodulators…. Additionally to the large existing range, Amphenol SVMicrowave is perpetually developing new components under customer specifications. | |
| > Signal Processing Components SVM [2213,48 Ko] | ||
| ||
 | Harnesses Amphenol SV Microwave produces an array of cable assemblies built exactly to each of our customers specifications. SV Microwave specializes in manufacturing Flexible, Conformable, and Semi-Rigid cable assemblies as well as an assortment of Delay Lines | |
| > Please consult us | ||
| ||
 | RF Connector solutions Amphenol RF and its subsidiary SV Microwave offer the most complete RF interconnect solution available today. Popular series such as BNC, TNC, N and SMA, as well as Precision High Frequency versions are available in a variety of styles and finishes. In addition Amphenol RF and SV Microwave can supply blind mate connectors such as BMA, BMMA, SMP, SMPM etc. and the precision bayonet coupling series ZMA. Complete cable assemblies are available with a wide range of test and matching capabilities as well as unique or custom design connectors designed and manufactured to meet your requirements. Coaxial terminations and attenuators are also available. With ever increasing frequencies being used in military command, control and computing systems RF interconnect technology has had to develop to meet these new requirements. Amphenol RF and SV Microwave are able to design, manufacture and test RF connectors and cable assemblies that perform at up to 67GHz. To satisfy market needs a dedicated and talented team of design engineers are supported by the very latest versions of state of the art high frequency 3D RF design and simulation software, along with the very latest test and measurement equipment available to ensure the required performance is achieved. With ISO9000, AS9100 and various other qualifications and a large range of MIL QPL parts available the highest standards are guaranteed to be met. | |
| > More info | ||
| ||
 | LJT / Mil-DTL-38999 I Environmental subminiature cylindrical connectors with bayonet coupling system and contact protection via scoop-proof design. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > LJT/HE308 Subminiature cylindrical connectors MIL-DTL-38999 Series I [4323,44 Ko] | ||
| > LJT/JT Subminiature cylindrical connectors MIL-DTL-38999 series I & II [1734,34 Ko] | ||
| ||
 | JT / Mil-DTL-38999 II Light weight subminiature cylindrical connectors with bayonet coupling system. Very often used when space is an issue due to the very compact design of the shell, the most compact of all the Mil-DTL-38999 Series. JT Series connectors are intermountable (same panel cut out) with Mil-C-26482 and SJT connectors. 9 Shells sizes, up to 128 contacts, including Coax, Twinax,and Optical termini. | |
| > JT - Subminiature cylindrical connectors - MIL-DTL-38999 series II [483,28 Ko] | ||
| > LJT/JT Subminiature cylindrical connectors MIL-DTL-38999 series I & II [1734,34 Ko] | ||
| ||
 | SJT / VG96912 / JN1003 Subminiature bayonet cylindrical connector derived from Mil-DTL-38999 Series and scoop-proof. The receptacles are intermountable (same panel cut out) with Mil-C-26482 and with Mil-DTL-38999 Series II. The JN versions can meet the performance levels required for the Eurofighter. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > SJT - Subminiature cylindrical connector [2412,46 Ko] | ||
| ||
 | TV / Mil-DTL-38999 III / JN1034 / EN3645 Subminiature screw-type cylindrical connector with anti-decoupling system, they are designed for the most stringent applications. The Mil-DTL-38999 Series III are all scoop-proof and available in metallic and composite versions. The JN versions can meet the performance levels required for the Eurofighter. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Tri-Start Subminiature cylindrical connectors - MIL-DTL-38999 series III [2139,61 Ko] | ||
| ||
 | CTV / Mil-DTL-38999 III / EN3645 Composite subminiature screw-type cylindrical connector with anti-decoupling system that are designed for the most stringent applications and have the key-advantage of the very low weight with contact protection via scoop-proof design. CTV connectors are qualified under the Mil-DTL-38999 Series III standard. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. The new high density inserts are compatile with composite connectors too, increasing furthermore the contact density for the same weight. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Tri-Start Subminiature cylindrical connectors - MIL-DTL-38999 series III [2139,61 Ko] | ||
| ||
 | TV St. S / Mil-DTL-38999 III / EN3645 Stainless steel subminiature screw-type cylindrical connector with anti-decoupling system, they are designed for the most stringent applications in term of vibrations, shocks, temperature, schielding effectiveness and corrosion resistance. 9 Shells sizes, up to 128 contacts including power and high speed contacts arrangements. The stainless steel receptacles are intermateable with the patented Clutch Lok plug connectors, the new patented version which mates under vibrations. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Tri-Start Subminiature cylindrical connectors - MIL-DTL-38999 series III [2139,61 Ko] | ||
| ||
 | Breakaway connectors with Lanyard release Breakaway connectors are mainly used for avionic and missile applications. The particularity is in the plug mechanism as the receptacles remain the same as the standard versions. Breakaway plugs are available in different coupling mechanism such as threaded (TV), bayonet (PT) and push-pull (PP39) coupling mechanism. Many contact arrangements are available according to the Mil-C-26482 and Mil-DTL-38999 standards that include Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Tri-Start Subminiature cylindrical connectors - MIL-DTL-38999 series III [2139,61 Ko] | ||
| ||
 | MTV / Clutch Lok Stainless steel subminiature screw-type cylindrical connector for very harsh environment in terms of shocks and vibrations. The Clutch-Lok technology confers to the plug the capability to screw on in vibrations. Clutch-Lok plugs are Mil-DTL-38999 Series III qualified and mate with standard Mil-DTL-38999 Series III recptacles. 9 Shells sizes, up to 128 contacts including power and high speed contacts arrangements. The typical applications are Aircraft engines, Helicopter rotors... | |
| > Clutch-Lok connectors for high vibration applications [686,72 Ko] | ||
| ||
 | PP39 / Push Pull Cylindrical Push-Pull connectors with same dimensions and inserts as Mil-DTL-38999 connectors. Mechanical and Electrical performances meet or exceed the ones of Mil-DTL-38999 Series III connectors, class W or F. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. Available in lanyard release configuration as well. | |
| > PP39 Push-Pull Connector [2877,84 Ko] | ||
| ||
 | LPHD / 38999 High Density Cylindrical connectors with Mil-DTL-38999 Series shells and High Density inserts (up to 50% more contacts versus Mil-DTL-38999 inserts) for size 23 Mil qualified contacts (M39029/47-314 & M39029/33-264). PCB Version available too. These high density inserts are available in the following series : Mil-DTL-38999 series I & III (LJT& TV-CTV), VG96912 shells (SJT), PP39 (Push-Pull), and the RNJ & RNJLP rack and panel versions. | |
| > Please consult us | ||
| ||
 | Power 38999 Cylindrical connectors derived from Mil-DTL-38999 Series with ruggedized power inserts including the following crimp contacts : 60A, 100A, 230A, 500A. These power connectors are available in the following series : Mil-DTL-38999 series I & III (LJT& TV-CTV), VG96912 shells (SJT), PP39 (Push-Pull), and the RNJ & RNJLP rack and panel versions. | |
| > LJT 21-48 : 4x50 Amps circular power connector [910,06 Ko] | ||
| > LJT 25-1A : 4x100 Amps circular power connectors [244,93 Ko] | ||
| > LJT 23-P1 : 1x250 Amps circular power connector HE308 23-01 [161,84 Ko] | ||
| > LJT 25 P1 - 1 X 500 Amps circular power connectors [143,75 Ko] | ||
| ||
 | Hermetic These connectors are available in the miniature or sub-miniature product range as well as D-sub connector. The connectors are fiitted with glass-filled inserts and the leakage is less than 1.10exp-7cubic cm per second under 1 bar differential pressure. Available shell types for cylindrical connectors are square flange, jam nut and solder mount receptacles. | |
| > Please consult us | ||
| ||
 | Sealed cylindrical Cylindrical and rectangular connectors equiped with sealed inserts and non removable contacts. These connectors withstand differential pressure with a very low leakage. They are available in male and female version (versus male only for glass filled hermetic) and their aluminum alloy shell allow lots of geometries versus glass filled hermetic connectors. Available with wire soldering and PCB contacts. | |
| > Please consult us | ||
| ||
 | Thru-Bulkhead receptacles Male/Female connectors to be fixed on a panel and that can mate with a plug on both sides. These connectors are available environmental and whithstand a differential pressure. They are available in the following series : Mil-DTL-38999 series I & III (LJT& TV), VG96912 shells (SJT), PP39 (Push-Pull), and the RNJ rack and panel versions.Consult us for hermetic versions. | |
| > Please consult us | ||
| ||
 | Backshells for Mil-DTL-38999 Rear accessories for cylindrical connectors (Mil-C-26482 Series I, Mil-DTL-38999 Series and derived from) including straight and angled versions, backnuts, cable clamps, adaptor for heatshrink molded piece or for overmoulding, EMI version through different termination technologies (braid soldering, clamping, stainless steel band system)... | |
| > Backshell for MIL-38999 series I, II, III and VG96912 connectors [1482,94 Ko] | ||
| ||
 | MB1 / Mil-C-26482 II Environmental miniature cylindrical connectors available with bayonet coupling in a number of shell finishes and styles. Rear removable contacts sizes AWG20 to AWG12 as crimp or PCB. Operating voltage to 2300VAC at sea level. Hermetic and SS versions available. | |
| > MB1 - Miniature cylindrical connectors - Mil-C-26482 series II [819,87 Ko] | ||
| ||
 | MT / BTY / BTK / M83723 / EN2997 / ESC Environmental miniature cylindrical connectors available with bayonet or threaded self-locking coupling systems. Shell material include Aluminum and SS. Firewall and hernetic versions can withstand temperatures to 260°C. Contact sizes from AWG20 to AWG12 and up to AWG08 shielded. Can support currents of up to 230A. | |
| > EN 2997 / BTK - Cylindrical Connectors - Mil-C-83723 series III [1844,64 Ko] | ||
| > MB / MT / MQ - Cylindrical Connectors - Mil-C-83723 series III [2909,99 Ko] | ||
| ||
 | ZZL / ZZB / FPK / Mil-C-26500 / Environmental miniature cylindrical connectors available with bayonet or threaded coupling systems with crimp front release contacts. The ratchet lock plug style on the threaded coupling system eliminates the need for safety wiring. They are very suitable for missile and avionic applications due to their lightweight construction, and have been designed for the Boeing Commercial Airplane Co. Shell material include Aluminum and SS. | |
| > ZZY / ZZW - Cylindrical Connectors - Mil-C-26500 [3892,82 Ko] | ||
| ||
 | 944 / Mil-C-5015 Environmental standard cylindrical connectors with threaded or reverse bayonet coupling. The higher performance is available with rear release crimp contacts in Aluminum or SS, with self-locking coupling for firewall applications. Contacts sizes AWG16 through 0 are standard. Radsock® high power versions are also available. | |
| > 944 - Cylindrical Connectors - Mil-C-5015 [856,59 Ko] | ||
| ||
 | GCA / GCB / VG95234 These connectors use the same installation dimensions and contact arrangements as connectors according to Mil-C-5015. However, they are provided with reverse bayonet coupling and ondular washer, which guarantee a fast and effortless locking/unlocking. They offer a high reliability, a shielding effectiveness and are waterproof. | |
| > Please consult us | ||
| ||
 | Micro D / Mil-DTL-83513 The microminiature connector series offers proven Mil Spec performance and reliability in rectangular and strip-line micro connectors up to 100 contacts. Microminiature connectors are available in rectangular D, strip and custom card edge configurations, with contacts on .050 (1,27mm) centers. Inserts in Micro D connectors with signal and coax as well as Plastic and Metal shells are available. Terminations are available in a broad range including solder cup, terminated to wire harness, vertical and right angle PCB and many different mounting hardware and backshells are offered. | |
| > Microminiature connectors [2083,62 Ko] | ||
| ||
 | SIM / EN4165 SIM Rectangular, modular interconnect, standard design is a combination of 2 or 4 individual ground, shunt or standard modules. Compact custom panel mounted design available. SIM is environmentally sealed, differential pressure sealed and EMI shielded. Contacts are Mil-C-39029 series rear removable crimp or PCB size 22 to 8 including coax, twinax, triax, quadrax, power, common with Mil-DTL-38999 Series. Available in aluminum and composite versions with various backshells and clamps. EN4165 qualified. | |
| > SIM EN4165 AALB [3483,16 Ko] | ||
| ||
 | SIM Composite / EN4165 Composite rectangular, modular connectors for space and weight conscious applications. Accept 2 or 4 ground, shunt or standard modules within the same connector. Environmentally sealed, EMI protected, include rear removable crimp contacts sizes AWG22 to AWG 8 including coax, twinax, triax and Quadrax common with Mil-DTL-38999 Series. Intermateable with metallic version. | |
| > SIM EN4165 AALB [3483,16 Ko] | ||
| ||
 | 1900 Series / EN3545 Composite environmentally sealed rectangular connectors available in 2 shell sizes with numerous contact arrangements. Includes sizes AWG22 to 8 crimp removable contacts common with Mil-DTL-38999 Series connectors such as coax, twinax, triax and Quadrax. Overmoulded back grommet and interfacial seal. | |
| > 1900 series EN3545 AALB [1579,83 Ko] | ||
| ||
 | Grounded The rectangular and cylindrical connectors equiped with ground plane inserts allow a state of the art grounding of all High-Speed contacts to the connector shell and then to the chassis of the equipment without hazardous cabling operation. This ground plane technology is now available in many connector series such as : Mil-DTL-38999, ARINC 600, EN3545, EN4165... for size 16, 12 and 8 High-Speed contacts. The new Low Voltage Differential Signaling contacts - Differential Twinax and Quadrax - have also their dedicated Ground Plane inserts. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| ||
 | Cylindrical with Stand-Off Square flange or Jam Nut receptacles equipped with PC Tails contacts and a Stand-Off. This Stand-off allow to fix the Board to the Connector with 3 to 4 screws. This feature avoids the use of fastening device during the soldering process as well as mechanical stress on the soldered terminations during the life of the equipment, and confers a state of the art grounding between the shell of the connector and the ground of the board. Receptacles equipped with Stand-Off are available with short leadtimes in the following series : Mil-C-26482 Series I, Mil-DTL-38999 Series I, II, III and SJT series. | |
| > Please consult us | ||
| ||
 | POM for Mil-DTL-38999 Cylindricals / Startop Fiber optic high speed transmission optical termini compatible with size 16 Mil-DTL-38999 Series III cavities for Multimode application. The large choice of Mil-DTL-38999 insert arrangements allows many possibilities (2/4/8 channels). These optical termini are intermateable with Mil-PRF-29504/4 & Mil-PRF-29504/5 optical termini. | |
| > Environmental Weatherproof Optical Connectors [1385,79 Ko] | ||
| > More info | ||
| ||
 | 2.5mm ferules for Mil-DTL-38999 derived connectors : TVOP - LJTOP - RNJOP Fiber Optic ceramic termini size 2,5mm for Multimode and Singlemode applications with High Return Loss. These optical termini are fitted in dedicated fiber optic inserts for a high performance level (0,5dB typical per connection). Inserts available in 2, 4 and 8 channels. These inserts are compatible with the following cylindrical connectors : Bayonet (LJTOP), Screw type (TVOP) and Rack and Panel (RNJOP). This technology has been chosen for harsh environment applications such as Navy, Avionic, Battlefield... | |
| > Environmental Weatherproof Optical Connectors [1385,79 Ko] | ||
| ||
 | MTRJField / LCField Concept allowing the use of a standard patchcord with MTRJ or LC fiber optic interface in a Mil-DTL-38999 Series III shell without specific tool. This cost effective solution eliminates hazardous in-field assembly. Available in 2 or 4 channels. | |
| > MTRJ Field TV [344,01 Ko] | ||
| > More info | ||
| ||
 | HMA2 This legacy hermaphroditic fiber optic lens connector facilitates the interconnection of multiple identical fiber optic cable assemblies known as daisy chaining, thus eliminating the need for polarising the use of in-line adapters. The connector is available in 1 to 4 way configurations for multimode fibers at both 850 and 1300nm applications (singlemode in development) and is intermateable with other manufacturers equivalent products. | |
| > HMATwo [507,54 Ko] | ||
| ||
 | MFM Fiber optic high speed transmission in a small, lightweight connector designed for harsh environments such as battlefield, navy... Singlechannel connector EN-3733 standard, utilizes fiber optic butt joint technology. Contact termination : Multimode or singlemode. Threaded coupling with keyway polarization. | |
| > MFM Series [44,85 Ko] | ||
| ||
 | Amphelux The Amphelux is the style fiber optical termini that complies with the ARINC 801 standard. The Amphelux is the new generation of high density (ceramic diameter 1,25mm), butt joint interconnect technology. The Amphelux can be fitted in dedicated shells for Mil-DTL-38 999 series III (cylindrical) and ARINC 600 or EN 4165 (rectangular) connectors. Features : ceramic ferule and sleeve 1,25mm. Removable alignment sleeve holder for easy cleaning, only one termini design for all connectors, MM and SM (PC & APC). This becomes the new worldwide standard for the avionic market segment and find other applications such as for battlefield communication. | |
| > Please consult us | ||
| ||
 | Active Plug The Fibre Optic Active Plug is an electro optical interface connector used in the harsh environment market, where secure data transmission, offering a high level of EMC and EMP protection comes as standard. By specifying the Fibre Optic Active Plug, the user perceives the interface between the equipment and fibre optic cable to be a standard electrical connector. Amphenol offer the facility to incorporate an electronic conversion module housed within the receptacle or plug backshell, providing coupling directly to the user's signal interface for different protocol. | |
| > Active Plug [37,22 Ko] | ||
| ||
 | Cabling tools The Amphenol Fibre Optic Termination Kit is specified as a generic termination system which includes all the necessary basic tooling equipment. As new product lines are developed Add on Sub Kits are designed to complement the basic set of tools. | |
| > Please consult us | ||
| ||
 | Cable assemblies Amphenol can design and build all of your cable assembly needs. Our quality system certified to ISO 9001 as well as our long experience in building fiber optic harnesses for harsh environment, ensure a state of the art assembly and control process. Every cable receives 100% inspection for both insertion loss and visual defects. Cables can be built with : CTOS- connectors, TFOCA, TFOCA II®, TFOCA III®, HMAtwo, D38999 connectors with optical termini size 16 MIL-PRF-29 504 for MM only, D38999 connectors with optical termini dia. 2,5mm for both MM and SM, MIL-PRF-28876 (US NAVY), Commercial connectors ST, SC, FC, MTRJ, LC, MU, LX5,... | |
| > 161 series LTD [383,99 Ko] | ||
| ||
 | Training Amphenol consider the training as an important service to its customers. Each training is customized following each customer's requirement. Amphenol provides a full training on : Basic theoretical knowledge, Practical assembly knowledge on both butt joint and expanded beam connectors. Individual handbooks are provided during and after the training for an optimal support. General technical training can meet the following: Introduction to Fiber Optics, Fiber technologies advantages, Connector technologies (Butt Joint, Expanded beams, MM and SM), Termination process for Singleway, Multiway, Butt joint or Expanded Beam connectors. | |
| > Please consult us | ||
| ||
 | RNJOP The RNJOP connector is a Rack & Panel Fiber optic high speed transmission Multichannel connector (2/4/8 channels) derived from the Mil-DTL-38999 Series I. RNJOP has the same mechanical features as the electrical RNJ but is equiped with inserts dedicated to 2,5mm ferule optical termini for a higher optical performance level in shocks and vibrations. RNJOP has been chosen on major US and European military avionic and battlefield programs for its reliability and cost effectiveness. | |
| > Environmental Weatherproof Optical Connectors : TVOP, LJTOP, RNJOP, STARTOP [1385,79 Ko] | ||
| ||
 | RNJLP RNJ-LP -the Low Profile version- of the RNJ is designed to match the panel to panel dimensional specifications of Arinc 404 and Arinc 600 providing a very compact rack & panel interconnect solution. RNJLP connectors are available in jam nut and square flange shell configurations. Moreover, RNJLP connectors can withstand differential pressure per design, key point for avionic applications. All Mil-DTL-38999 Series III and additional LPHD -size 23 contacts- insert patterns are available in RNJLP version, including Signal, Power, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini through high performance dedicated inserts for 2,5mm ferules. Hermetic versions available too. | |
| > RNJ Low Profile - Harsh environment rack & panel connectors [2522,43 Ko] | ||
| ||
 | ARINC 404 AR Series rack and panel connectors are designed to meet or exceed the requirement of Mil-C-81659 and ARINC Specification 404. These connectors are available in five shell styles with up to four insert cavities. Inserts accomodate signal and power contacts in size 12, 16, 20 and 22. Coaxial contact are available in size 5 and 9. Customize insert arrangements to include filter contacts, power, quadrax and fiber optic contacts are offered. AR connectors are available in Non-environmental or Environmentally sealed versions. | |
| > ARINC 404 - Rack and panel connectors [2805,48 Ko] | ||
| ||
 | 127 / HE801-HE804-HE807 Well-proven rectangular PCB connectors available in 2 or 3 rows from 17 to 144 signal contacts. Many hybrid inserts for Power or RF. Termination styles include crimp, wire soldering, thru-hole soldering, SMT, WW. | |
| > HE 8 / 127 Series [1197,55 Ko] | ||
| ||
 | SIHD High Density Rectangular PCB connectors in a 5 rows configuration. The contact technology confers a translation capability very suitable for thermal clamps use and a very high performance in terms of vibration. Numerous versions with ground strap available for higher data transmission. From 102 to 392 ways. | |
| > SIHD: Système d'Interconnexion Haute Densité [2214 Ko] | ||
| ||
 | SIAL Modular High Density Rectangular PCB connectors in a 5 rows configuration. Its versatility allows the use of signal, power and RF contacts. The metallic body and the contact technology confer a very high performance in terms of schocks and vibration as well as a translation capability for thermal clamps use. From 17 to 392 ways. | |
| > SIAL : Laminar Architecture Interconnection System [2141,57 Ko] | ||
| ||
 | NAFI 1 & UHD Medium to high-density interconnects with fork and blade contacts - module card connectors with flex termination and solderless press-fit backplane connectors for attachment to PCBs. EMI shielding, coax, fiber optic, board to board, staggered grid pattern, and power contacts available. Standards : Mil-C-28754, EIA 15-763, and DESC89065. | |
| > Backplane system, tuning fork and blade connector solutions [3555,14 Ko] | ||
| ||
 | HDAS Rectangular PCB connector with screw-machined contacts and Starclips sockets. Very cost-effective per design. Numerous custom-design geometries. Available in Thru-hole and press-fit terminations. | |
| > HDAS: High Density Amphenol Socapex PCB connector [3485,27 Ko] | ||
| ||
 | SMASH Rectangular PCB connector (Surface Mount Rectangular Amphenol Socapex Hi-density) respecting the SEM-E form factor (Line Replaceable Module). The metallic shell is equiped with Grounding/Guiding pins, the contacts are screw-machined and sockets integrate the Starclips technology, which confers high performance and cost-effectiveness. Very suitable for Harsh Environment including Schocks, Vibrations and High Temperature. From 1 to 3 bays with 150 signals per bay (Chevron Grid), Differential Signal and Optical Termini are also available. | |
| > SMASH Connectors: Surface Mount Amphenol Socapex High Density [3945,96 Ko] | ||
| ||
 | LRM Rectangular PCB connector using the well-proven high performance Bristle Brush contact technology allowing low mating forces and extended service life. This SEM-E form factor connector (Line Replaceable Module concept) has a Metallic shell equiped with Grounding/Guiding pins and an Electro Static Discharge protection. Many configurations available from 1 to 3 bays with the following density available : Chevron grid (150 ways per bay), Staggered grid (180 ways per bay), GEN-X (236 ways per bay). Differential Signal and Optical Termini also available. | |
| > LRM Surface mount connectors reference guide [5593,38 Ko] | ||
| ||
 | LRM Range Extension (Diffys, Optic, AirFlow) The Amphenol LRM connector is now available in many configurations that meet the demands of the avionic industry such as : the LRM Staggered Grid Airflow-Thru connector in order to provide more airflow cooling of inserts, LRM with Fiber Optics MIL-T-504/4, /5, /14 & /15 termini or MT Ferule arrangements, LRM connectors to accommodate RF contacts size 16, 12, 8 up to DC-32GHz or GPPO coax contacts, LRM Power supply modules with 270VDC sections for Corona-free operation at 100,000ft, LRM differential pairs dedicated modules, Radsok® High Amperage socket contacts within inserts of the LRM, and many more | |
| > LRM Surface mount connectors reference guide [5593,38 Ko] | ||
| ||
 | VME64X R Amphenol Aerospace developped the Ruggedized VME64X in response to the military trend towards VME64X and the utilization of COTS Boards and Chassis. Ruggedized VME cards are existing but are generally used with the standard VME COTS connector interface. In a harsh environment, the COTS VME connector can fail, negating all of ruggedization on the cards. Main features and benefits : Metallic shells, ESD Protection on the module side, Robust contact system, 3 modules insert with different interconnect applications including 2mm electrical, Fiber optic MT ferules... | |
| > Amphenol Product Overview [2932,08 Ko] | ||
| ||
 | AmphePower Radsok® High amperage, up to 1000A, contact technology replaces the traditional threaded post and ring terminal. Twisted hyperbolic grid ensures greatest possible contact areas on mating pin up to 65%. Benefits include high number of mating cycles, reduced insertion force, and a self cleaning effect during mating. Wide range of wire crimp barrels or PCB/Busbar swage mount features available. | |
| > Please consult us | ||
| ||
 | Discrete Filters FX Series Amphenol's discrete feed-thru filters offer excellent low cost filter solutions for military and aerospace electronics applications, especially where small size and high performance are important.They are available in threaded bushing and solder-mount styles with capacitance ranges from 10pF to 600nF to meet the Mil-F-15733. Nevertheless, due to Amphenol's unique manufacturing process, higher capacitance values and greater voltage withstand capabilities are achieved with the same industry standard package size. | |
| > Filtered connectors : filtrated Arinc, MIL-C-24308 - Discrete filters, filters plates & terminal blocks [2045,31 Ko] | ||
| ||
 | Quadrax & Differential Twinax Transition Adapters In conjunction with its Differential Twinax and Quadrax contacts, Amphenol has developped full line of 100 and 150Ohm plug contacts and receptacle/transition adapters (straight or 90° versions) in order to facilitate launching of controlled impedance signals to printed circuit boards. | |
| > Quadrax contacts [779,81 Ko] | ||
| ||
 | D Sub / Mil-C-24308 Amphenol have a wide range of D-Subminiature connectors suitable for Military and Aerospace applications. A broad range of inserts (standard, high density, combo…) as well as many terminations including solder cup, rear release crimp contacts, PCB tails, SMT, compliant pins are available. Filtered versions, hermetic versions as well as corresponding accessories are offered too. | |
| > FD 308 Filtrated D-Sub connectors, ruggedized [70,52 Ko] | ||
| > SD 308 Sealed D-Sub connectors [70,53 Ko] | ||
| ||
 | Micro D The Microminiature connector series offers proven Mil Spec performance and reliability in rectangular and strip-line micro connectors up to 100 contacts. Microminiature connectors are available in rectangular D, strip and custom card edge configurations, with contacts on .050 (1,27mm) centers. Inserts in Micro D connectors with signal and coax as well as Plastic and Metal shells are available. Terminations are available in a broad range including solder cup, terminated to wire harness, vertical and right angle PCB and many different mounting hardware and backshells are offered. | |
| > Microminiature connectors [2083,62 Ko] | ||
| ||
 | I/O connectors with PC Tails Amphenol have a wide range of environmental rectangular and cylindrical I/O connectors for PC Board attachment (PC Tails with many lengths, Compliant pin contacts, Flex circuitry for jumper...). These connectors includes signal, coax, twinax, triax and quadrax contacts. The shape of the connector may be adapted to meet the board application such as stand-off for cylindrical receptacles which allows a state of the art mechanical board fixing on the receptacle with swrews, receptacle short skirt to minimize the space needed in the box... Many different connector fittings are available to make the installation on the panel easier when space is an issue. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Cylindrical connectors for Printed Circuit Board applications [1123,93 Ko] | ||
| ||
 | Thermal Clamps Mechanical clamps which lock and unlock in a quarter turn for applying a pressure between the heatsink of the Daughter Board and the cold wall of the box for the dissipation of the board. No dynamometric tool required and very safe design in vibrations versus screw type versions. Several versions available such as fixed into the box or directly riveted on the Daughter Board, from 40mm up to 300mm. | |
| > Thermal clamps Amphenol series SIHD-GT [616,3 Ko] | ||
| ||
 | Flex & Rigid Assemblies ACT Save weight and geometrically fit wiring into tight space requirements with Flex or Rigid Flex Circuits. Sculptured® Flexible Circuits with built-in termination eliminate the failures associated with crimped or soldered-on contacts. Flat, sculptured, or rigid-flex styles are strong, yet higly flexible for use with I/O connectors. | |
| > Please consult us | ||
| ||
 | Backplane Solutions Backplane assemblies are custom designed using high-density, board to backplane interconnections. Backplane capabilities include press-fit, through-hole solder, SMT, rack and panel, rigid-flex circuits, fiber optics and high power technology. Standard Mil-C-28754 | |
| > Backplane system, advanced interconnect packaging for military and aerospace [1644,39 Ko] | ||
| > Backplane MT [77,24 Ko] | ||
| ||
 | Electronic Packaging Amphenol's broad offering of interconnect and board level products enables our system level engineering team to take on custom turn-key solutions such as chassis integration, thermal dissipation, temperature sensor systems, power distribution systems, bus bar assemblies, ethernet switches integration, and much more. | |
| > Please consult us | ||
| ||
 | Cylindrical with Stand-Off Square flange or Jam Nut receptacles equipped with PC Tails contacts and a Stand-Off. This Stand-off allow to fix the Board to the Connector with 3 to 4 screws. This feature avoids the use of fastening device during the soldering process as well as mechanical stress on the soldered terminations during the life of the equipment, and confers a state of the art grounding between the shell of the connector and the ground of the board. Receptacles equipped with Stand-Off are available with short leadtimes in the following series : Mil-C-26482 Series I, Mil-DTL-38999 Series I, II, III and SJT series. | |
| > More info | ||
| ||
 | Relay Sockets The industry's broadest range of pluggable bases for electro-mechanical relays supplied to Mil-PRF-12883, European, and custom configurations. Environmentally sealed for harsh environment applications. Accept crimp contacts to Mil-C-39029. High temperature, fluid resistant, Track mount and Panel mount. | |
| > More info | ||
| > More info | ||
| ||
 | Junction modules / Mil-T-81714 Series II High density, Low weight, environmentally sealed junction module and light weight composite mounting track system. Four basic module sizes AWG12 to AWG22 in a variety of bussing configurations. Supplied with M39029/22 socket contacts. Engineered to the most cost-effective Series II junction module available. | |
| > More info | ||
| ||
 | Lighting connectors Series 3554 is a sealed overmolded power supply connector using 2 socket contacts AWG22, designed to fit directly in the rear of the LED reading lights. | |
| > Please consult us | ||
| ||
 | In-Line Splices These single and multi-contact in-line splices facilitate system expansion and repair. This product breadth includes AWG22 to AWG16 contacts and Diode and Resistor package versions are available too. Qualified to Mil-T-81714 Series I and II, and 1119 splices to NSA936830. Custom electronic packages also available. | |
| > More info | ||
| ||
 | Bus Bar - Power distribution Unique design provides significant advantages in terms of weight reduction and size. Nickel plated Aluminum bars with epoxy coats provides increased strength and meet all applicable specification requirements for fluid resistan ce, toxic fumes and heat generation. Bus Bars are very suitable for aeronautic, ground vehicles and navy applications. | |
| > Please consult us | ||
| ||
 | Junction modules / Mil-T-81714 Series I Track-mounted terminal junction modules in five standard sizes AWG12 through AWG26 with a broad selection of bussing variations. Environmentally sealed and designed to operate in harsh environments. Mounting system offers great flexibility. Used for signal and power distribution. Supplied with M39029 pin contacts. | |
| > More info | ||
| ||
 | Ground modules Multi-contact grounding/bus connection modules to both Mil-T-81714 Series I and Series II, and 1174, are available in sizes AWG22 to AWG12, with ground stud or flange mount. Mounting to a bus bar provides power distribution, sensing or metering. Environmentally sealed. | |
| > Ground modules AALB [250,6 Ko] | ||
| > Rectangular ground modules [357,03 Ko] | ||
| ||
 | Quick Mount Relay Sockets JRS/JRE sockets snap into the mounting panel, reducing installation time by 80% and weight by 40%. Captured hardware adds to efficiency and prevent loss. Environmentally sealed, conform to Mil-PRF-12883 performance. Packages with applicable Mil-C-39029 crimp contacts. | |
| > More info | ||
| ||
 | Backplanes Backplane assemblies are custom designed using high-density, board to backplane interconnections. Backplane capabilities include press-fit, through-hole solder, SMT, rack and panel, rigid-flex circuits, fiber optics and high power technology. Standard Mil-C-28754 | |
| > Backplane system, advanced interconnect packaging for military and aerospace [1644,39 Ko] | ||
| > Backplane MT [77,24 Ko] | ||
| > Backplane MT [77,24 Ko] | ||
| > [77,24 Ko] | ||
| ||
 | Electronic packaging Amphenol's broad offering of interconnect and board level products enables our system level engineering team to take on custom turn-key solutions such as chassis integration, thermal dissipation, temperature sensor systems, power distribution systems, bus bar assemblies, ethernet switches integration, and much more. | |
| > Please consult us | ||
| ||
