 | | | | | |
 Mil / Aero Markets | |||||
| |||||
 Military and commercial avionic / Airframe | |||||
 | | ||||
| C4I SR | |||||
| | ||||
| Ground Vehicles | |||||
| | ||||
| Marine applications | |||||
| | ||||
| Weapons / Munitions | |||||
| | ||||
| Space | |||||
| | ||||
For other Mil/Aero products not described in this list, please consult documentation link hereafter : Amphenol documentation
Click on your market segment
 | Cable supports Reduced weight, high temperature thermoplastic cable support systems retain wire bundles in aircraft, reduce installed cost, and provide increased reliability. Custom designs, configurations and materials are available. These cable supports are aeronautic and ground vehicles fluids compatible and flame resistant. Highly reliable overmolded tie-straps for demanding applications. | |
| > Wiring accessories [1675,29 Ko] | ||
 | ||
 | Pipe supports Custom accessories for airframe, ground vehicles and boats cabling and pipe support form a total pipe and cable management system developped to reduce weight, cost and installation time. Simplified installation and maintenance enhance reliability. Engineered high-temp plastics, no metal parts, engineered to user's needs. | |
| > Pipe supports [498,92 Ko] | ||
| ||
 | Custom design Custom accessories cabling and pipe support form a specific pipe and cable management system developped to reduce cost and installation time. Simplified installation and maintenance enhance reliability. Plastic materials engineered to user's need : high-temp, fluids compatible, high reliability, ... Applicable to Aeronautic, Ground and Sea equipments : vehicle frames, fuel tank, Wheel well... | |
| > Please consult us | ||
| ||
 | RNJ RNJ rack and panel connectors with realignment capability designed for harsh environment in term of sealing, shocks, vibrations and EMI-RFI protection. RNJ connectors are designed to connect electrical devices between a moving unit (rack) and a fixed unit (panel). The locking of the mating pair(s) is ensured by the mechanical device of the rack. RNJ connectors are available in jam nut shell configurations. The RNJ receptacle is mateable with a Mil-DTL-38999 Series I plug as well for easy testing of the rack system. All Mil-DTL-38999 Series I -from shell size 11 to 25 - and additional LPHD -size 23 contacts- insert patterns are available in RNJ version, including Signal, Power, Coax, Twinax, Triax, Differential Twinax, Quadrax. For optical termini, please consult the RNJOP with high performance dedicated inserts for 2,5mm ferules. Hermetic versions available too. | |
| > RNJ - Harsh environment rack & panel connectors [1395,67 Ko] | ||
| ||
 | SIM Rack and Panel connectors Miniature, rectangular interconnect system serves as an alternate to cylindrical connectors where space and modularity are critical. The rack and panel versions are offered with guiding pins and spring devices to ensure a perfect contact mating at the interface. The versatility of the SIM connectors allows many different shapes for the rack depending on the customer's requirement. The contact offering includes Power, Coax, Twinax, Triax, Differential Twinax, Quadrax as well as Optical termini. | |
| > SIM EN4165 AALB [3483,16 Ko] | ||
| ||
 | RJField Range Rugged circular and rectangular interconnect which can be fitted directly -without particular tooling- with standard cordsets such as RJ45 Ethernet (Cat.5e), USB, Firewire (IEEE1394), RJ11 and the MTRJ and LC fiber optic interfaces. Available in Mil-DTL-38999 Series III or Mil-C-26482, low cost Cat.6 circular shells, or rectangular shells such as SIM. Provides environmental protection : IP67, dust, shocks and vibrations. Eliminates hazardous and costly in-field assembly. | |
| > Field Series Catalogue [11202,88 Ko] | ||
| ||
 | Differential Twinax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these differential twinax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Differential twinax are existing in different matched impedance versions and are terminated to a shielded twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Size 8 High Speed Quadrax and Differential Twinax Contacts [1012,66 Ko] | ||
| ||
 | Quadrax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these quadrax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Quadrax are existing in different matched impedance versions and are terminated to a shielded double twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Quadrax contacts [779,81 Ko] | ||
| ||
 | Filters Cylindrical (Mil-DTL-38999,...) Amphenol have a very strong experience in designing and manufacturing Filter Solutions for the Mil Aerospace industry. Filtered connectors in cylindrical styles using planar and tubular technology provide EMI and EMP protection. The filter types are available in a wide range of capacitance and voltage values and may be selected in virtually any combination within the connector insert (Pi, LRC, CLR, C, T). Filter adapters available for existing devices for filtering without redesign. For PCB versions, we also provide header assemblies to protect the connector before soldering onto PC Board. | |
| > EMI Filter / Transient protection connectors [1988,96 Ko] | ||
| ||
 | Filters Rectangular (Mil-C-24308, MicroD...) Amphenol offer a large range of rectangular filter connectors such as Arinc 404, Arinc 600, Mil-C-24308 D-Sub and specific geometries to meet his customers applications. These products are available in different filtering technologies : Planar arrays and Tubular capacitors. The filter types are available in a wide range of capacitance and voltage values and may be selected in virtually any combination within the connector insert (Pi, LRC, CLR, C, T). | |
| > Filtered connectors : filtrated Arinc, MIL-C-24308 - Discrete filters, filters plates & terminal blocks [2045,31 Ko] | ||
| ||
 | Discrete Filters Amphenol FX Series of discrete Feed-Thru Filters offer excellent cost-effective solutionsfor military and aerospace electronics applications, especially where small size and high performance are important. Manufactured to meet the requirements of Mil-F-15733, they are available in threaded bushing and soldermount styles with capacitance ranges from 10pF to 600nF. Higher capacitance values and greater voltage withstand capabilities are available when necessary. | |
| > Filtered connectors : filtrated Arinc, MIL-C-24308 - Discrete filters, filters plates & terminal blocks [2045,31 Ko] | ||
| ||
 | BNC BNC is a miniature version of the Type C connector and stands for Bayonet Neill Concelman and is named after Amphenol engineer Carl Concelman. The BNC product line is a miniature quick connect/disconnect RF connector. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. BNC’s are ideally suited for cable termination for miniature to subminiature coaxial cable (RG-58, 59, to RG-179, RG-316, etc.). Amphenol 50 O BNC connectors are miniature, lightweight units designed to operate up to 11 GHz and typically yield low reflection through 4 GHz. Amphenol also offers a full line of 75 O BNC connectors to meet the needs for higher performance impedance-matched cable interconnections. Part numbers that are listed with the appropriate M39012 number are military grade connectors produced in accordance with and actively qualified to the military specification MIL-C-39012. | |
| > BNC Amphenol RF [1865,88 Ko] | ||
| ||
 | TNC The TNC stands for Threaded Neill Concelman and is named after Amphenol engineer Carl Concelman. Designed as a threaded version of the BNC, the TNC series features screw threads for mating. TNC are miniature, threaded weatherproof units with a constant 50 O impedance and they operate from 0 - 11 GHz. | |
| > TNC Amphenol RF [2137,62 Ko] | ||
| ||
 | SMA SMA is an acronym for SubMiniature version A and was developed in the 1960's. It uses a threaded interface. 50 O SMA connectors are semi-precision, subminiature units that provide excellent electrical performance from DC to 18 GHz. These high-performance connectors are compact in size and mechanically have outstanding durability. SMA connectors for semi-rigid coaxial cables and the SMA Plug-to-Jack adapter offer a precise and simple means of phase adjustment for microwave devices. Built in accordance with MIL-C-39012 and CECC 22110/111, SMA connectors can be mated with all connectors that meet these spec mating diameters regardless of manufacturer. | |
| > SMA Amphenol RF [669,29 Ko] | ||
| ||
 | Differential Twinax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these differential twinax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Differential twinax are existing in different matched impedance versions and are terminated to a shielded twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Size 8 High Speed Quadrax and Differential Twinax Contacts [1012,66 Ko] | ||
| ||
 | Quadrax Amphenol Low Voltage Differential Signaling (LVDS) TIA/EIA-644, Firewire IEEE 1394, and Fibre Channel are examples of communication protocols which use differential signaling to provide high speed data rates. The interface of these quadrax contacts is not concentric in order to preserve the highest performance in term of impedance. These size 8 contacts are kept in the right position in theirs cavities - can not rotate - with a keying system. Quadrax are existing in different matched impedance versions and are terminated to a shielded double twisted pairs cable or to a PCB. These contacts are compatible with many dedicated inserts in cylindrical and rectangular housings (Mil-DTL-38999, ARINC 600, SIM, EN3545...) | |
| > Quadrax contacts [779,81 Ko] | ||
| ||
 | Blind Mate RF Amphenol SV Microwave, Inc. provides the ideal connector solution for rack-and-panel, module-to-module and module-to-motherboard applications. SMP, BMA, BMMA, BMZ and BZ blindmate connectors can be mounted in standard or custom shells. Fixed mount BMA connectors accommodate up to .030 inch (.76mm) axial and .008 inch (.20mm) total connector radial misalignment safely through 12GHz. The external spring mechanisms of float mount versions provide even higher axial and radial misalignment tolerances. Low-profile connectors offer the ultimate solution when space is at a premium. Custom cable assemblies are also available. | |
| > Blindmate SVM [1175,57 Ko] | ||
| ||
 | Signal Processing components Amphenol SV Microwave offer a large range of Signal processing components such as Phase shifters, Variable attenuators, Vector modulators, Mixers, Directional couplers, Power splitters, I/Q Modulators & Demodulators…. Additionally to the large existing range, Amphenol SVMicrowave is perpetually developing new components under customer specifications. | |
| > Signal Processing Components SVM [2213,48 Ko] | ||
| ||
 | Harnesses Amphenol SV Microwave produces an array of cable assemblies built exactly to each of our customers specifications. SV Microwave specializes in manufacturing Flexible, Conformable, and Semi-Rigid cable assemblies as well as an assortment of Delay Lines | |
| > Please consult us | ||
| ||
 | RF Connector solutions Amphenol RF and its subsidiary SV Microwave offer the most complete RF interconnect solution available today. Popular series such as BNC, TNC, N and SMA, as well as Precision High Frequency versions are available in a variety of styles and finishes. In addition Amphenol RF and SV Microwave can supply blind mate connectors such as BMA, BMMA, SMP, SMPM etc. and the precision bayonet coupling series ZMA. Complete cable assemblies are available with a wide range of test and matching capabilities as well as unique or custom design connectors designed and manufactured to meet your requirements. Coaxial terminations and attenuators are also available. With ever increasing frequencies being used in military command, control and computing systems RF interconnect technology has had to develop to meet these new requirements. Amphenol RF and SV Microwave are able to design, manufacture and test RF connectors and cable assemblies that perform at up to 67GHz. To satisfy market needs a dedicated and talented team of design engineers are supported by the very latest versions of state of the art high frequency 3D RF design and simulation software, along with the very latest test and measurement equipment available to ensure the required performance is achieved. With ISO9000, AS9100 and various other qualifications and a large range of MIL QPL parts available the highest standards are guaranteed to be met. | |
| > More info | ||
| ||
 | LJT / Mil-DTL-38999 I Environmental subminiature cylindrical connectors with bayonet coupling system and contact protection via scoop-proof design. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > LJT/HE308 Subminiature cylindrical connectors MIL-DTL-38999 Series I [4323,44 Ko] | ||
| > LJT/JT Subminiature cylindrical connectors MIL-DTL-38999 series I & II [1734,34 Ko] | ||
| ||
 | JT / Mil-DTL-38999 II Light weight subminiature cylindrical connectors with bayonet coupling system. Very often used when space is an issue due to the very compact design of the shell, the most compact of all the Mil-DTL-38999 Series. JT Series connectors are intermountable (same panel cut out) with Mil-C-26482 and SJT connectors. 9 Shells sizes, up to 128 contacts, including Coax, Twinax,and Optical termini. | |
| > JT - Subminiature cylindrical connectors - MIL-DTL-38999 series II [483,28 Ko] | ||
| > LJT/JT Subminiature cylindrical connectors MIL-DTL-38999 series I & II [1734,34 Ko] | ||
| ||
 | TV / Mil-DTL-38999 III / JN1034 / EN3645 Subminiature screw-type cylindrical connector with anti-decoupling system, they are designed for the most stringent applications. The Mil-DTL-38999 Series III are all scoop-proof and available in metallic and composite versions. The JN versions can meet the performance levels required for the Eurofighter. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Tri-Start Subminiature cylindrical connectors - MIL-DTL-38999 series III [2139,61 Ko] | ||
| ||
 | CTV / Mil-DTL-38999 III / EN3645 Composite subminiature screw-type cylindrical connector with anti-decoupling system that are designed for the most stringent applications and have the key-advantage of the very low weight with contact protection via scoop-proof design. CTV connectors are qualified under the Mil-DTL-38999 Series III standard. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. The new high density inserts are compatile with composite connectors too, increasing furthermore the contact density for the same weight. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Tri-Start Subminiature cylindrical connectors - MIL-DTL-38999 series III [2139,61 Ko] | ||
| ||
 | Breakaway connectors with Lanyard release Breakaway connectors are mainly used for avionic and missile applications. The particularity is in the plug mechanism as the receptacles remain the same as the standard versions. Breakaway plugs are available in different coupling mechanism such as threaded (TV), bayonet (PT) and push-pull (PP39) coupling mechanism. Many contact arrangements are available according to the Mil-C-26482 and Mil-DTL-38999 standards that include Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Tri-Start Subminiature cylindrical connectors - MIL-DTL-38999 series III [2139,61 Ko] | ||
| ||
 | MTV / Clutch Lok Stainless steel subminiature screw-type cylindrical connector for very harsh environment in terms of shocks and vibrations. The Clutch-Lok technology confers to the plug the capability to screw on in vibrations. Clutch-Lok plugs are Mil-DTL-38999 Series III qualified and mate with standard Mil-DTL-38999 Series III recptacles. 9 Shells sizes, up to 128 contacts including power and high speed contacts arrangements. The typical applications are Aircraft engines, Helicopter rotors... | |
| > Clutch-Lok connectors for high vibration applications [686,72 Ko] | ||
| ||
 | PP39 / Push Pull Cylindrical Push-Pull connectors with same dimensions and inserts as Mil-DTL-38999 connectors. Mechanical and Electrical performances meet or exceed the ones of Mil-DTL-38999 Series III connectors, class W or F. 9 Shells sizes, up to 128 contacts, including power patterns, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini. Available in lanyard release configuration as well. | |
| > PP39 Push-Pull Connector [2877,84 Ko] | ||
| ||
 | LPHD / 38999 High Density Cylindrical connectors with Mil-DTL-38999 Series shells and High Density inserts (up to 50% more contacts versus Mil-DTL-38999 inserts) for size 23 Mil qualified contacts (M39029/47-314 & M39029/33-264). PCB Version available too. These high density inserts are available in the following series : Mil-DTL-38999 series I & III (LJT& TV-CTV), VG96912 shells (SJT), PP39 (Push-Pull), and the RNJ & RNJLP rack and panel versions. | |
| > Please consult us | ||
| ||
 | Power 38999 Cylindrical connectors derived from Mil-DTL-38999 Series with ruggedized power inserts including the following crimp contacts : 60A, 100A, 230A, 500A. These power connectors are available in the following series : Mil-DTL-38999 series I & III (LJT& TV-CTV), VG96912 shells (SJT), PP39 (Push-Pull), and the RNJ & RNJLP rack and panel versions. | |
| > LJT 21-48 : 4x50 Amps circular power connector [910,06 Ko] | ||
| > LJT 25-1A : 4x100 Amps circular power connectors [244,93 Ko] | ||
| > LJT 23-P1 : 1x250 Amps circular power connector HE308 23-01 [161,84 Ko] | ||
| > LJT 25 P1 - 1 X 500 Amps circular power connectors [143,75 Ko] | ||
| ||
 | Hermetic These connectors are available in the miniature or sub-miniature product range as well as D-sub connector. The connectors are fiitted with glass-filled inserts and the leakage is less than 1.10exp-7cubic cm per second under 1 bar differential pressure. Available shell types for cylindrical connectors are square flange, jam nut and solder mount receptacles. | |
| > Please consult us | ||
| ||
 | Sealed cylindrical Cylindrical and rectangular connectors equiped with sealed inserts and non removable contacts. These connectors withstand differential pressure with a very low leakage. They are available in male and female version (versus male only for glass filled hermetic) and their aluminum alloy shell allow lots of geometries versus glass filled hermetic connectors. Available with wire soldering and PCB contacts. | |
| > Please consult us | ||
| ||
 | Micro D / Mil-DTL-83513 The microminiature connector series offers proven Mil Spec performance and reliability in rectangular and strip-line micro connectors up to 100 contacts. Microminiature connectors are available in rectangular D, strip and custom card edge configurations, with contacts on .050 (1,27mm) centers. Inserts in Micro D connectors with signal and coax as well as Plastic and Metal shells are available. Terminations are available in a broad range including solder cup, terminated to wire harness, vertical and right angle PCB and many different mounting hardware and backshells are offered. | |
| > Microminiature connectors [2083,62 Ko] | ||
| ||
 | SIM / EN4165 SIM Rectangular, modular interconnect, standard design is a combination of 2 or 4 individual ground, shunt or standard modules. Compact custom panel mounted design available. SIM is environmentally sealed, differential pressure sealed and EMI shielded. Contacts are Mil-C-39029 series rear removable crimp or PCB size 22 to 8 including coax, twinax, triax, quadrax, power, common with Mil-DTL-38999 Series. Available in aluminum and composite versions with various backshells and clamps. EN4165 qualified. | |
| > SIM EN4165 AALB [3483,16 Ko] | ||
| ||
 | SIM Composite / EN4165 Composite rectangular, modular connectors for space and weight conscious applications. Accept 2 or 4 ground, shunt or standard modules within the same connector. Environmentally sealed, EMI protected, include rear removable crimp contacts sizes AWG22 to AWG 8 including coax, twinax, triax and Quadrax common with Mil-DTL-38999 Series. Intermateable with metallic version. | |
| > SIM EN4165 AALB [3483,16 Ko] | ||
| ||
 | 2.5mm ferules for Mil-DTL-38999 derived connectors : TVOP - LJTOP - RNJOP Fiber Optic ceramic termini size 2,5mm for Multimode and Singlemode applications with High Return Loss. These optical termini are fitted in dedicated fiber optic inserts for a high performance level (0,5dB typical per connection). Inserts available in 2, 4 and 8 channels. These inserts are compatible with the following cylindrical connectors : Bayonet (LJTOP), Screw type (TVOP) and Rack and Panel (RNJOP). This technology has been chosen for harsh environment applications such as Navy, Avionic, Battlefield... | |
| > Environmental Weatherproof Optical Connectors [1385,79 Ko] | ||
| ||
 | TFOCA II 4 Channels The heart of the TFOCA-II® family of deployable fiber optic connectors centers on the TFOCA-II® sealed free floating termini. The unique termini design enables TFOCA-II® connectors to seal against high humidity and moisture conditions while allowing full axial and orbital movement of the mated termini, providing low insertion loss and minimal back reflection. Features : Hermaphroditic Design for Versatility - Enables multiple TFOCA-II® plug assemblies to be concatenated. Removable End Cap - Allows for easy field maintenance and cleaning. 4-Channel Connector Design - Two fold improvement over TFOCA with better optical performance. | |
| > TFOCA II Hermaphroditic connector [425,98 Ko] | ||
| ||
 | AXOS-E Expanded beam, lens and window technology means effortless cleaning. As this connector is hermaphroditic, it is suitable for easy daisy chain deployment in harsh environment. Outer diameter 27mm, 2 and 4 channels configurations offered with multimode termini. Operating temperature -40°C +85°C, 5000 mating cycles. | |
| > AXOS-e - 976 Series [514,73 Ko] | ||
| ||
 | CTOL Expanded beam, lens and window technology means effortless cleaning. As this connector is hermaphroditic, it is suitable for easy daisy chain deployment in harsh environment. 2/4/8 channels configurations offered with single mode and multimode termini. Outer diameter 52mm. Operating temperature -40°C +85°C, 10000 mating cycles for the stainless steel version. A 2 channels and a 4 channels versions intermateable with the CTO connector for maintenance. | |
| > CTOS-CTOL : Fiber Optic Field Connectors [1615,23 Ko] | ||
| ||
 | RNJOP The RNJOP connector is a Rack & Panel Fiber optic high speed transmission Multichannel connector (2/4/8 channels) derived from the Mil-DTL-38999 Series I. RNJOP has the same mechanical features as the electrical RNJ but is equiped with inserts dedicated to 2,5mm ferule optical termini for a higher optical performance level in shocks and vibrations. RNJOP has been chosen on major US and European military avionic and battlefield programs for its reliability and cost effectiveness. | |
| > Environmental Weatherproof Optical Connectors : TVOP, LJTOP, RNJOP, STARTOP [1385,79 Ko] | ||
| ||
 | RNJLP RNJ-LP -the Low Profile version- of the RNJ is designed to match the panel to panel dimensional specifications of Arinc 404 and Arinc 600 providing a very compact rack & panel interconnect solution. RNJLP connectors are available in jam nut and square flange shell configurations. Moreover, RNJLP connectors can withstand differential pressure per design, key point for avionic applications. All Mil-DTL-38999 Series III and additional LPHD -size 23 contacts- insert patterns are available in RNJLP version, including Signal, Power, Coax, Twinax, Triax, Differential Twinax, Quadrax and Optical termini through high performance dedicated inserts for 2,5mm ferules. Hermetic versions available too. | |
| > RNJ Low Profile - Harsh environment rack & panel connectors [2522,43 Ko] | ||
| ||
 | 127 / HE801-HE804-HE807 Well-proven rectangular PCB connectors available in 2 or 3 rows from 17 to 144 signal contacts. Many hybrid inserts for Power or RF. Termination styles include crimp, wire soldering, thru-hole soldering, SMT, WW. | |
| > HE 8 / 127 Series [1197,55 Ko] | ||
| ||
 | SIHD High Density Rectangular PCB connectors in a 5 rows configuration. The contact technology confers a translation capability very suitable for thermal clamps use and a very high performance in terms of vibration. Numerous versions with ground strap available for higher data transmission. From 102 to 392 ways. | |
| > SIHD: Système d'Interconnexion Haute Densité [2214 Ko] | ||
| ||
 | SIAL Modular High Density Rectangular PCB connectors in a 5 rows configuration. Its versatility allows the use of signal, power and RF contacts. The metallic body and the contact technology confer a very high performance in terms of schocks and vibration as well as a translation capability for thermal clamps use. From 17 to 392 ways. | |
| > SIAL : Laminar Architecture Interconnection System [2141,57 Ko] | ||
| ||
 | HDAS Rectangular PCB connector with screw-machined contacts and Starclips sockets. Very cost-effective per design. Numerous custom-design geometries. Available in Thru-hole and press-fit terminations. | |
| > HDAS: High Density Amphenol Socapex PCB connector [3485,27 Ko] | ||
| ||
 | SMASH Rectangular PCB connector (Surface Mount Rectangular Amphenol Socapex Hi-density) respecting the SEM-E form factor (Line Replaceable Module). The metallic shell is equiped with Grounding/Guiding pins, the contacts are screw-machined and sockets integrate the Starclips technology, which confers high performance and cost-effectiveness. Very suitable for Harsh Environment including Schocks, Vibrations and High Temperature. From 1 to 3 bays with 150 signals per bay (Chevron Grid), Differential Signal and Optical Termini are also available. | |
| > SMASH Connectors: Surface Mount Amphenol Socapex High Density [3945,96 Ko] | ||
| ||
 | LRM Rectangular PCB connector using the well-proven high performance Bristle Brush contact technology allowing low mating forces and extended service life. This SEM-E form factor connector (Line Replaceable Module concept) has a Metallic shell equiped with Grounding/Guiding pins and an Electro Static Discharge protection. Many configurations available from 1 to 3 bays with the following density available : Chevron grid (150 ways per bay), Staggered grid (180 ways per bay), GEN-X (236 ways per bay). Differential Signal and Optical Termini also available. | |
| > LRM Surface mount connectors reference guide [5593,38 Ko] | ||
| ||
 | LRM Range Extension (Diffys, Optic, AirFlow) The Amphenol LRM connector is now available in many configurations that meet the demands of the avionic industry such as : the LRM Staggered Grid Airflow-Thru connector in order to provide more airflow cooling of inserts, LRM with Fiber Optics MIL-T-504/4, /5, /14 & /15 termini or MT Ferule arrangements, LRM connectors to accommodate RF contacts size 16, 12, 8 up to DC-32GHz or GPPO coax contacts, LRM Power supply modules with 270VDC sections for Corona-free operation at 100,000ft, LRM differential pairs dedicated modules, Radsok® High Amperage socket contacts within inserts of the LRM, and many more | |
| > LRM Surface mount connectors reference guide [5593,38 Ko] | ||
| ||
 | VME64X R Amphenol Aerospace developped the Ruggedized VME64X in response to the military trend towards VME64X and the utilization of COTS Boards and Chassis. Ruggedized VME cards are existing but are generally used with the standard VME COTS connector interface. In a harsh environment, the COTS VME connector can fail, negating all of ruggedization on the cards. Main features and benefits : Metallic shells, ESD Protection on the module side, Robust contact system, 3 modules insert with different interconnect applications including 2mm electrical, Fiber optic MT ferules... | |
| > Amphenol Product Overview [2932,08 Ko] | ||
| ||
 | AmphePower Radsok® High amperage, up to 1000A, contact technology replaces the traditional threaded post and ring terminal. Twisted hyperbolic grid ensures greatest possible contact areas on mating pin up to 65%. Benefits include high number of mating cycles, reduced insertion force, and a self cleaning effect during mating. Wide range of wire crimp barrels or PCB/Busbar swage mount features available. | |
| > Please consult us | ||
| ||
 | Discrete Filters FX Series Amphenol's discrete feed-thru filters offer excellent low cost filter solutions for military and aerospace electronics applications, especially where small size and high performance are important.They are available in threaded bushing and solder-mount styles with capacitance ranges from 10pF to 600nF to meet the Mil-F-15733. Nevertheless, due to Amphenol's unique manufacturing process, higher capacitance values and greater voltage withstand capabilities are achieved with the same industry standard package size. | |
| > Filtered connectors : filtrated Arinc, MIL-C-24308 - Discrete filters, filters plates & terminal blocks [2045,31 Ko] | ||
| ||
 | Quadrax & Differential Twinax Transition Adapters In conjunction with its Differential Twinax and Quadrax contacts, Amphenol has developped full line of 100 and 150Ohm plug contacts and receptacle/transition adapters (straight or 90° versions) in order to facilitate launching of controlled impedance signals to printed circuit boards. | |
| > Quadrax contacts [779,81 Ko] | ||
| ||
 | Micro D The Microminiature connector series offers proven Mil Spec performance and reliability in rectangular and strip-line micro connectors up to 100 contacts. Microminiature connectors are available in rectangular D, strip and custom card edge configurations, with contacts on .050 (1,27mm) centers. Inserts in Micro D connectors with signal and coax as well as Plastic and Metal shells are available. Terminations are available in a broad range including solder cup, terminated to wire harness, vertical and right angle PCB and many different mounting hardware and backshells are offered. | |
| > Microminiature connectors [2083,62 Ko] | ||
| ||
 | I/O connectors with PC Tails Amphenol have a wide range of environmental rectangular and cylindrical I/O connectors for PC Board attachment (PC Tails with many lengths, Compliant pin contacts, Flex circuitry for jumper...). These connectors includes signal, coax, twinax, triax and quadrax contacts. The shape of the connector may be adapted to meet the board application such as stand-off for cylindrical receptacles which allows a state of the art mechanical board fixing on the receptacle with swrews, receptacle short skirt to minimize the space needed in the box... Many different connector fittings are available to make the installation on the panel easier when space is an issue. | |
| > TV / CTV - Subminiature cylindrical connectors - MIL-DTL-38999 series III / EN3645 [1015 Ko] | ||
| > Cylindrical connectors for Printed Circuit Board applications [1123,93 Ko] | ||
| ||
 | Thermal Clamps Mechanical clamps which lock and unlock in a quarter turn for applying a pressure between the heatsink of the Daughter Board and the cold wall of the box for the dissipation of the board. No dynamometric tool required and very safe design in vibrations versus screw type versions. Several versions available such as fixed into the box or directly riveted on the Daughter Board, from 40mm up to 300mm. | |
| > Thermal clamps Amphenol series SIHD-GT [616,3 Ko] | ||
| ||
 | Flex & Rigid Assemblies ACT Save weight and geometrically fit wiring into tight space requirements with Flex or Rigid Flex Circuits. Sculptured® Flexible Circuits with built-in termination eliminate the failures associated with crimped or soldered-on contacts. Flat, sculptured, or rigid-flex styles are strong, yet higly flexible for use with I/O connectors. | |
| > Please consult us | ||
| ||
 | Backplanes Backplane assemblies are custom designed using high-density, board to backplane interconnections. Backplane capabilities include press-fit, through-hole solder, SMT, rack and panel, rigid-flex circuits, fiber optics and high power technology. Standard Mil-C-28754 | |
| > Backplane system, advanced interconnect packaging for military and aerospace [1644,39 Ko] | ||
| > Backplane MT [77,24 Ko] | ||
| > Backplane MT [77,24 Ko] | ||
| > [77,24 Ko] | ||
| ||
