Catalogue RJ Field HD - page 137

Amphenol
137
Part number code
Series USB Field TV
USBF TVX
2S
A
2
N
03
A
Shell Type
2S:
square flange receptacle
7S:
jam nut receptacle
Coding: “A" (Standard) or "B"
Back Terminations
2:
rugged USB cable
Shells Plating
N:
Nickel
G:
Olive drab cadmium plating
USB cable length
03:
30 cm [11.81 inches]
05:
50 cm [19.68 inches]
10:
1 meter [39.37 inches]
USB cable end
A:
Standard USB-A plug
OPEN:
Open cable (no connector)
CAPS for receptacles :
Part
number
Plating
Cap for square flange receptacle
Cap for jam nut receptacle
Nickel
USBFTVC2N
USBFTVC7N
Olive drab cadmium
USBFTVC2G
USBFTVC7G
Black Zinc Nickel
USBFTVC2ZN
USBFTVC7ZN
REMARK:
as the receptacles are compounded (IP68 trans-
versally sealing), the coding position has to be specified in
the part number:
A
(standard), or
B
Coding A
Receptacle
Connection side view
Coding B
Main key
USB insulation
on the left
USB insulation
on the right
1. Only if you need a full sealing (IP68): Install the white sticker around the
plug, covering the 4 little holes of the overmolding
2. Insert the black O Ring around the front face of the USB A plug. This O
Ring will ensure connection sealing
3. Insert the USB cordset into the metallic backshell
4. Insert the retention spacer laterally to the cable (this spacer is soft, in
order to adapt to different shapes of overmolding) and slide the over-
molding of the USB-A plug into this retention spacer
5. Insert the friction ring laterally to the cable
6. Choose the right coding (2 positions) and insert the USB-A plug into the
protective plug. Note at this step, the main key is used for polarization.
7. Screw the backshell on the plug body. A wrench can be necessary to fully
tighten it, and the connection to the receptacle can help.
Assembly instructions of the plug
1
2
3
4
5
6
7a
7b
IMPORTANT NOTE
The connection sealing is not done by the black retention spacer (which
is sloted), but by the front face ORing (fig.2)
Connection side view of the receptacle
Coding A
Plug
Connection side view
Coding B
Main key
USB insulation
on the left
USB insulation
on the right
P/N:
USBF ODE
IMPORTANT NOTE
To remove the insert use the insert removal
tool for plug.
1...,127,128,129,130,131,132,133,134,135,136 138,139,140,141,142,143,144,145,146,147,...156
Powered by FlippingBook