Page 3 - Fiche SLX VA.qxp (Page 2)

SEO Version

SLX
OVERALL DIMENSIONS
Contacts as spare parts*
Contact gauge AWG
12
16
20
Part-number for one pin
21713
800660
800650
Part-number for one socket
21728
800664
800654
Cabling tools
Contacts insertion and removal
Cabling process
Crimping process
Place the positioner in the pliers.
Choose the selector number on the positioner according to
the contact size to crimp.
Strip the wire end (7.5mm for size 12 contact / 6mm for size
16 contact / 4mm for size 20 contact).
Insert the wire in the crimp barrel of the contact and check
through the inspection hole of the contact that wire is well-
placed.
Place the contact with the wire into the pliers until the stop.
Completely close the tool and after, let it open itself.
Visually check if crimping is correct and by the inspection
hole of the contact if the wire is well-placed in the crimp
barrel.
Contact insertion
Insert the wired contact in the groove of the tool, taking care
that the extremity of the tool touches the shoulder of the contact.
Insert the contact in its cavity from wiring side and steadily
push the tool along the axis of the cavity until the contact
locks home.
Carefully withdraw the tool , applying a forward pressure on
the wire.
Pull on the wire to check that the contact is correctly locked.
Contact removal
Insert the tool from the mating side and push it along the
contact axis until contact unlocks.
Pull the contact out from the rear of the connector.
Contacts
Insertion tool P/N
Removal tool P/N
# 12: Pin
141900
21746
# 12: Socket
141900
21745
# 16: Pin
48680
809731
# 16: Socket
48680
809732
# 20: Pin
39048
809729
# 20: Socket
39048
809730
Straight or right-angle backshell
* Black and Nickel Backshells are ROHS compliant.
- Straight or right-angle backshells are delivered with different clamping pads.
- Green backshells (conductive finish) are delivered with metallised clamping pads.
Accessories
Crimping tools
• Crimping pliers: 809857 (Mil. P/N: M22520/1-01)
• Positioner:
21770
For arrangement 419 AR and 23C: TP943
• Controlling jauge: 809907 (Mil. P/N: M22520/3-1)
(Selector number: 4)
10
47377N
47377NI
21458N
47381N
47381NI
21462N
20
47378N
47378NI
21459N
47382N
47382NI
21463N
30
47379N
47379NI
21460N
47383N
47383NI
21464N
40
47380N
47380NI
21461N
47384N
47384NI
21465N
Backshell reference
Connector
straight
right-angle
size
black*
nickel*
green cadmium black*
nickel*
green cadmuim
(non conductive) (conductive)
(conductive)
(non conductive) (conductive)
(conductive)
Adaptator for flexible conduit
and PG:
Sealing sleeve:
Plug and receptacle protection
caps:
Receptacle with locking
ring protection caps:
Connector
PG
size thread
SL RF 209N 20
9
SL RF 211N 20
11
SL RF 313N 30
13
SL RF 316N 30
16
SL RF 416N 40
16
SL RF 421N 40
21
SL RF 429N 40
29
Connector Size Ref.
Straight
10 43458
Right-angle 10 43473
Straight
20 43456
or
30 44666
Right-angle 40 43457
}
F 3B
BF
Size
1B:
10
3B:
30
2B:
20
4B:
40
M:
Pin connector
F:
Socket connector
F M 3B
SLB
F:
Plug
E:
Receptacle
Size
1B:
10
3B:
30
2B:
20
4B:
40
M:
Pin connector
F:
Socket connector
Plug and receptacle: none
Line mount receptacle:
R
for plug or line mount
receptacle
* For arrangement 419 AR and 23C: Part-number for one pin: 35941
Part-number for one socket: 35970
- Caps and sealing sleeves are ROHS.