RJ45 ATEX Zone 2 versions

Explosion proof Ethernet solutions for Zone 2

Key features
  • EN60079-15 standard: within Zone 2 and class I, Division 2, as low power non sparking connectors
  • Available in RJ 11
Applications
  • Oil & Gas: Geophysics, Drilling, Transportation, Downstream
Technical informations

Performances

  • Ex marking II3G ExnAIIT6 X
  • Operating temperature range -40°C / +60°C
  • Voltage 60 Veff max
  • Power 20 W max
  • Outside cable diameter 6mm to 12mm Sealing IP68

Data transmission

10 BaseT, 100 BaseTX & 1000 BaseT networks. Cat.5e per TIA/EIA 568B & Class D per ISO/IEC 11801 11801 Cat6 per TIA/EIA 568B and ClassE per ISO/IEC 11801

Resources

Catalog Rugged Digital Networks Solutions

Last update : Thu, 02/22/2018 - 11:44

Catalog Rugged Digital Networks Solutions Cat6

Last update : Wed, 01/24/2018 - 12:23

No entries for this content

Yes, you will find our RJF and USB solutions on our Rugged Digital Networks Solutions catalog. These solutions are zone 2 and class1.

https://www.amphenol-socapex.com/

We do not give any shelf life for our connectors since it depends on the mating cycles. For instance, for a PT connector, the mating cycle is 500. 

https://www.amphenol-socapex.com/

The CE marking is not necessary for electrical connectors. The UTE CEF 48B Connector Commission classifies the electrical connectors as passive components and concludes that the CE marking is not required, neither on the product itself, neither on the package. It is however required for the system using this connector.

https://www.amphenol-socapex.com/

You can consult our ROHS/REACH compliance by clicking here.
For any nominative compliance, please contact us.

https://www.amphenol-socapex.com/

No entries for this content