Tous nos harnais électriques

Pour les applications militaires et industrielles les plus exigeantes, Amphenol SOCAPEX est spécialisé dans la fabrication de harnais électriques personnalisés avec des composants de haute qualité. Amphenol SOCAPEX vous aidera à concevoir et à produire des harnais électriques sur mesure à partir d'un cahier des charges ou d'une impression client.

Notre offre intègre :

  • Harnais personnalisés avec gaine thermo rétractable
  • Harnais de sur-tressage
  • Solutions de harnais électriques surmoulés
Harnais personnalisés avec gaine thermo rétractable

Nos solutions clés en main comprennent :

  • Réceptacles terminés par des cordons avec signaux spécifiques (Ethernet, USB,...)
  • Câblage de boîtes de distribution électrique, de boîtes de jonction
  • Solutions haute vitesse incluant Quadrax, Octomax, contacts RF, RJF...
  • Solutions surmoulées incluant les cordons Ethernet et USB de la norme militaire 38999.


Overbraided Electrical Harnesses

Key points

  • Tin or nickel plated copper & stainless steel metallic braiding.
  • Vinyl coated nylon , Nomex , Polyester & Kevlar non-metallic braiding.
  • 24 carrier high performance separate machines for metallic & non-metallic braids.

Overbraiding technology

Overbraiding technology allows superior screening (EMI/ EMC) of wire bundles with increased optical coverage, much better than with separate tubular braids. This is mainly intended for harnesses for sensitive missile, marine, and battlefield communication applications. In addition, this allows us more reactivity by realizing internally specific cables, for which we suffer long lead time and minimum order quantities from cable suppliers.

Amphenol Socapex overbraiding capabilities 

Harness is pulled through the braider vertically by attaching a “turtle” clamp or hook at the beginning of the harness. This clamp or hook is attached on a piece of cord that is suspended from a pulley located directly over the braider. This cord is then wound around the motorised pulley so that when the braider is operating it will pull the harness assembly at an even rate so that the picks per inch braided will be uniform. This method uses a 160mm pulley which is independently driven by an A.C motor and gearbox with an electromechanical clutch located on the side of the machine. The pick rate or coverage is controlled by a potentiometer.

Amphenol Overmolded Electrical Harness solutions

Key points

  • Straight and Right Angle Overmolding for all military connectors shell sizes
  • Applications in Ethernet, High Speed, and power supply
  • Molds designed in-house
  • Customized overmolding available (particular angle, color,…)
  • IP67 approved

Overmolding technology

Overmolding technology consists in putting the rear side of the connector/backshell together with the cable into a mold to mold a protection around the connector/backshell and the cable. The overmolding replaces the use of a pre-glued heat-shrink molded piece.
This creates a very strong and sealed junction between the connector/backshell and the cable, along with a very clean finish.

Amphenol Socapex overmolding capabilities

With this technology, we are to terminate numerous connector types, in straight or right angle versions, plug or receptacle. We are tooled up for connectors 38999 Series I, 38999 Series III, 2M, PT-451, and even proprietary connectors from other sources than Amphenol.
Our molds are developed and manufactured in-house, in a 12 weeks period. If you need a particular configuration, just contact us.