Rack and Panel RNJ / RNJ LP Connectors

RNJ is derived from the D38999 series I and is HE308 qualified. Some components used in RNJ are similar to the ones used in LJT – D38999 series I, such as the contacts and the inserts.
RNJ connectors accept all 38999 series I and series III inserts. The RNJ Jam nut receptacle is fully compatible with a 38999 series I or LJT 06 plug.  
To learn more about Rack and Panel RNJ connectors, check out our 3D video.

The RNJ connectors ensures floatability and realignment while offering blind mate possibilities. The connector's design helps the good mating while guiding the plug into the receptacle and adjusting if needed, following its realignment tolerances on 3 axis : 1mm on axial axis; 6° on angular axis and 0,5mm on longitudinal.  To learn more about Rack and Panel RNJ connectors, check out our 3D video.

The RNJ LP is a RNJ Low profile, meaning the distance between the 2 panels have been reducing at maximum, while providing the same benefits than a standard RNJ. It is available with all 38999 series III layouts and similar materials than the RNJ. Find out more information on the RNJ LP Product page

In RNJ Low Profile version, the distance between panels are reduced. This allows our customers to find the best configuration to fit their needs, with panels distance from 36mm to 7,3mm as you can see on the scheme below.

To learn more about Rack and Panel RNJ connectors, check out our 3D video.

RNJ and RNJ LP connectors are available in Aluminum with Olive Drab Cadmium, Black Zinc Nickel and Nickel plate, and in Stainless steel too (303 or 316L).

To learn more about Rack and Panel RNJ connectors, check out our 3D video.

Crimp contacts or PC tails contacts are available for RNJ and RNJ LP connectors. You can order these contacts along with your connectors.
Please be aware that we don’t recommend using PC tails contacts on RNJ / RNJLP plugs unless soldering on flex.

To learn more about Rack and Panel RNJ connectors, check out our 3D video.

Yes, we offer numerous deviation and shells adaptations on our RNJ connectors. For example, the RNJ range is available in stand-off (double flange), integrated backshells and Reduced Flange. More info on our RNJ Reduced Flange here.

According to your requirements, we can propose some specific designs, please contact our Technical Support team to specify your needs.
 

Can't find the answer to your question?

Ask our technical support