Lux-Beam #12

Single Expanded Beam termini EN4869

Key features
  • Single Expanded Beam Termini
  • Enables upgrades from optical physical contact technology to optical contactless technology
  • Size 12 series III for MIL-DTL-38999 / EN3645 / EN4165
Applications
  • Battlefield Communication
  • Grounded vehicles
  • Military avionics Industrial
Technical information

Performances

  • Expanded Beam technology Surface expanded bundle >140X
  • Reduced sensitivity to dust No degradation of the optical face
  • Easy cleaning Low maintenance
  • Compatibility Cavity #12 MIL-DTL-38999 series III TV/CTV, EN3645 EN 4165 (SIM)
  • Accept ARINC 801 or dia. 1.25 mm optical termini

Other benefits:

  • Easy installation and replacement as a FUSE (without optical wiring)
  • Realignment Patented, for compatibility with multisources connectors
  • Possibility to mix with Electrical contact for Hybrid solutions

Lux-beam is easy to clean, and is less sensitive to pollution by dust or debris. The contactless coupling of Lux-Beam is not subject to degradation of performances resulting from friction of optical surfaces as it usually is on traditional butt joint termini. Check out the Lux-Beam video

Resources

FO Cable System Designer’s Guide

Last update : Tue, 03/29/2022 - 09:41

Brochure Lux Beam Size 12

Last update : Wed, 08/24/2022 - 09:03

Aucun résultat dans cette catégorie

Aucun résultat dans cette catégorie

Aucun résultat dans cette catégorie

The high bandwidth capabilities and low attenuation characteristics make optical fiber ideal for gigabit transmission and beyond.

Greater bandwidth, higher speed
Fiber optic cables are able to transmit much more data than copper cables of the same diameter.

Security
Since fiber optic systems do not emit RF signals, they are difficult to tap into without being detected.

Less attenuation (signal loss) over greater distances
Copper cables require a booster after just 328 ft. (100 meters) while single-mode fiber cables reliably can go thousands of feet before an amplifier or repeater is needed.

Decreased size, weight and cost in the long run
Compared to copper conductors of equivalent signal carrying capacity, fiber optic cables are easier to install and maintain, require less duct space, weigh 10 to 15 times less and cost less than copper.

No sparks or shorts
Fiber optics do not emit sparks or cause short circuits, which is important in explosive gas or flammable environments.

Electromagnetic/Radio Frequency Interference Immunity
Optical fibers are immune to electromagnetic interference and emit no radiation.

Grounding
Fiber optic cables do not have any metal conductors; consequently, they do not pose the shock hazards inherent in copper cables.

Discover our Fiber Optics solutions (termini, connector, cordsets, cables, drums) dedicated to harsh environment military and aeronautical applications. If you need any assistance in selecting the right Fiber Optics interconnect solution for your requirements, please contact our Technical Support Team.

 

https://www.amphenol-socapex.com/

Aucun résultat dans cette catégorie